Re: Need Detent Ball Bearing for Sweep Mode Switch


n4buq
 

The ball out of the old switch was an exact match.

I felt a bit bad for robbing it but the switch was an older one out of a rather crusty old transmitter that I'd already robbed parts from so that made me feel a bit more okay about it.

On to fixing that Sweep Mode Switch. Thanks to everyone for the helpful pointers. I'll keep those in mind as resources.

Thanks,
Barry - N4BUQ

----- Original Message -----
From: "n4buq" <n4buq@knology.net>
To: TekScopes@groups.io
Sent: Wednesday, June 2, 2021 3:50:17 PM
Subject: Re: [TekScopes] Need Detent Ball Bearing for Sweep Mode Switch

Apparently the one close by does not have the individual ball bearings. I
found an old rotary switch that has what appears to be the same size
bearings in it. Hopefully it does and I can use one of them.

Thanks,
Barry - N4BUQ

----- Original Message -----
From: "adesilva_1999 via groups.io" <adesilva_1999=yahoo.com@groups.io>
To: TekScopes@groups.io
Sent: Wednesday, June 2, 2021 12:42:11 PM
Subject: Re: [TekScopes] Need Detent Ball Bearing for Sweep Mode Switch

Ace hardware carries a few sizes. Not sure if you have one in your area
though!









Join TekScopes@groups.io to automatically receive all group messages.