Re: 465 Missing a Few Components


 

On Mon, Apr 5, 2021 at 11:23 PM, Stephen wrote:


It’s a European made scope, so the serial number starts with 70xxxxx.
Actually, Tektronix had factories in three locations in Europe:
Units with serial numbers starting with 1 were made in Guernsey (Channel Islands)
Units with serial numbers starting with 2 were made in London (UK)
Units with serial numbers starting with 7 were made in Heerenveen (Netherlands)

Unfortunately, there is no way to cross-reference serial numbers between factories; each used their own serialization.

Have a look for the main board number; it should have the form of 670-xxxx-yy and is usually located near the Beam Finder switch.

Raymond

Join TekScopes@groups.io to automatically receive all group messages.