Re: TDS3064B "ripple" on calibrator signal


 

Unfortunately that isn't the problem ☹ Also tried other probes.

D.

-----Original Message-----
From: TekScopes@groups.io <TekScopes@groups.io> On Behalf Of Dave Peterson via groups.io
Sent: 03 March 2021 16:08
To: TekScopes@groups.io
Subject: Re: [TekScopes] TDS3064B "ripple" on calibrator signal

David,

In my limited experience, I have seen this behavior before, but it's always been due to probe issues.

Join TekScopes@groups.io to automatically receive all group messages.