Re: Horizontal Display switch shenanigans.


adesilva_1999@...
 

Hi Dave,
Check this: https://www.mouser.com/ProductDetail/TE-Connectivity/510-AG90D-10?qs=%2Fha2pyFaduhM4gHyZk8iA5%252BbCzoO6EXmbo0JD0Y5IKbJxRi4JyNZJA%3D%3D

You can get something like this and break off just one pin and solder in place. Depending on the diameter of the pin on the switch, It might mate with the open end. If you need to test it out, I can send a couple of the to you.

One other method is to wrap around a similar diameter copper wire (single strand) and solder it close to the bottom of the switch leg. and slightly bend it to go in the PCB hole. I will PM you if you want to talk.

Ananda

Join TekScopes@groups.io to automatically receive all group messages.