Sorry about the noise Dave thank you for all that you do your Manuals have saved my butt a few times.
toggle quoted messageShow quoted text
On 4/21/2020 6:27 PM, ArtekManuals wrote:
OK you have my attention though goodness knows why?
The 177 is the "Standard test fixture" for the 577. It is included in the 577 operators manual and has a separate stand alone service manual
On 4/21/2020 1:26 PM, Colin Herbert via groups.io wrote:
I think there are a couple of inconsistencies/mistakes here.
The title of your post is "RE: [Tekscopes] Artek Manuals", but it has nothing to do with Artek Manuals.
You start off mentioning a 577, but then go on to mention a 177 twice. As far as I am aware, there is no Tek 177.
I also think that Tam is advising the OP NOT to scrap the 577, so your request is possibly out-of-place.
From: TekScopes@groups.io [mailto:TekScopes@groups.io] On Behalf Of Eric
Sent: 21 April 2020 18:13
Subject: Re: [TekScopes] Artek Manuals
If you are scrapping out a 577 I am in need of a high voltage cap from the 177 or would be interested in the whole 177 if it is available.
On Wed, Apr 15, 2020, 10:02 AM Tam Hanna <firstname.lastname@example.org <mailto:email@example.com> > wrote:
on the risk of a beating: if you want to scrap the 577 because of a dead
CRT, do NOT do it.
A fix is forthcoming. Send an e-mail OFF LIST, saying STINKELY.