Re: Ringing on 2235 100 volt supply


barry.ballenger@...
 

John did you have the attenuators board.out to repair. My B channel quit
working and believe it may be the B attenuator board.

On Sat, Apr 4, 2020 at 1:37 PM John G <mnjgfl@centurylink.net> wrote:

The 6 mm is just a bit short. I cut a 4-4 screw about 7 mm long and it
worked perfect. Maybe the holes are slightly stripped.
Thanks for affirming it should be 6 mm.
John

On Sat, Apr 4, 2020 at 11:49 AM, <barry.ballenger@gmail.com> wrote:


john where is a pix of the screw from my scope, it is 6 mm long

On Sat, Apr 4, 2020 at 8:48 AM John G <mnjgfl@centurylink.net> wrote:

Thanks Barry, I have the screws somewhere in the scope, obviously not
in
the right place. The length would be helpful.
Thanks
John





Join TekScopes@groups.io to automatically receive all group messages.