Re: Ringing on 2235 100 volt supply


John G
 

I finally got around to replacing the "Sweep Gain" adjustment pots (Digi-Key # 3329H-102LF-ND) and recapping it. My problem is the screws that secure the front of the attenuator board from the bottom. I can't seem to find the right one's. Either too short to hold or too long and they bind up the input coupling switch. Any one know what length they should be? The service manual doesn't have a description.
Picture of location:

https://groups.io/g/TekScopes/photo/242594/0?p=Created,,,20,2,0,0

Thanks
John

Join TekScopes@groups.io to automatically receive all group messages.