Re: 547 scope HV transformer problem. One practical solution.


John Griessen
 

On 2/16/20 4:43 PM, Ernesto wrote:
I have added a toggle switch on the side cover of the scope, close to the CRT. Now after initial power up, I wait for a reasonable time for the instrument to stabilize (something that takes time with the 1A1 plug in!) Then I turn on the display and make adjustments and measurements, and 5 minutes is plenty of time. Then I turn the display off
Sounds like a good way to enjoy your 547 while waiting for a transformer!

Join TekScopes@groups.io to automatically receive all group messages.