Re: Knob repair tips

Tim Phillips

from Tim P (UK)
................ or use an adjustable hose-clamp ('Jubilee clip') to hold
the bits onto the hub ?


On Thu, 7 Nov 2019 at 12:36, Chuck Harris <cfharris@...> wrote:

Because the plastic has shrunk, you need to increase
the space for the center hub. The easiest way I have
found is to assemble the parts as well as you can, and
then wrap some rubber bands around the knob to provide

Then take a soldering iron, and heat the center hub.

The instant the plastic relaxes, remove the heat, and
cool the hub by blowing on it.

After all is done, a drop of acrylic solvent glue will,
seal the deal, so to speak.

-Chuck Harris

Dave Voorhis wrote:
I just acquired a Telequipment (British subsidiary of Tek in the
60’s/70’s) CT71 curve tracer in excellent working condition and good
cosmetic shape, but for a cracked knob. Like the usual Tek knobs, it’s a
plastic shell around a linear-knurled metal core. The plastic appears to
have shrunk slightly, causing it to crack and no longer grip the core.

If I recall correctly, someone posted tips on this forum on how to
permanently repair such shrink-cracked knobs, but my search-fu must be
broken today because I can’t find the relevant posts.

Can anyone can give me a quick recap and/or point me to the posts on <>?

Join to automatically receive all group messages.