Re: P6139a with broken tip

Stephen Hanselman
 

Good Morning,

I have the following probe tips
3.5mm
Tip-tail - Part Number - Qty on hand
Natural-Grey - 206-0389-01 - 6ea
Blue--Yellow - 206-0440-00 - 7ea
Black-red - no p/n - 8ea
Grey-Blue - 206-0392-00 - 13ea
Black-Blue - no p/n - 1ea
Brown(could be funky red)-natural - no p/n - 3ea If red then p/n 206-0416-00
2.5mm
Clear-Clear - 206-0265-13 - 5ea (NOS), 8ea(pull)
Clear-Blue - 206-0265-10 - 20ea (NOS), >20ea (pull)
Yellow-Blue - no p/n - 2ea
Clear-Clear - 206-0265-13 - 8ea (pull)
Brown-Red - no p/n - 10ea
Clear-Yellow - 206-0265-12 - 8ea

196-2963-00 - P6469 Lead set
174-0976-00 - P6101 probe cable 2ea NOS
6106 probe body
131-4997-01 - Probe tip
131-4353-00 - PCB to probe adapter - 20ea
"clip" style grounds - >20ea
"ring" style grounds >20ea
015-0540-00 - Cable for P6501 - 1Ea
175-9411-00 - cable - 1ea
174-0976-00 cable 1ea
174-0971-00 - 2ea
010-0361-00 P6046 10X Attenuator

Sorry for the bandwidth but I though the group of tek collectors might like the inventory. There are other hard to describe easily spares also

Contact off list if interested

Steve

-----Original Message-----
From: TekScopes@groups.io <TekScopes@groups.io> On Behalf Of jgkolek@...
Sent: Saturday, October 5, 2019 11:31 AM
To: TekScopes@groups.io
Subject: Re: [TekScopes] P6139a with broken tip

Hi,

I just posted a new query elsewhere on this board with similar thoughts: can I use a CT3667 (206-0441-00 equivalent) used in P6139A to replace a 206-0378-00 used in a P6137?

Regards,
JGK

Join TekScopes@groups.io to automatically receive all group messages.