Re: Sanity check- is the TM500 interface spacing .150" or .156"?

Harvey White

I have two, and wouldn't part with them.  They're a very good piece of work and well worth the price.

Every once in a while, he might be convinced to make some more.

Considering the two wide plugins there are, two would be rather nice.  Three could be better.


On 10/3/2019 5:40 PM, Dennis Tillman W7PF wrote:
The JAMMA extenders have been around for a long time. I made one of them myself even though I already had a Tek TM500 extender. The big advantage of the JAMMA extender is its rock bottom price. It will do just fine assuming extenders are something that you use infrequently.

More recently Dan Meeks <> created a much more functional (and gorgeous) implementation of the TM500 flexible extender with several useful debugging features that make it more than just an extender. The price for the kit was also rock bottom: $22 + $7 shipping, and they were available through Amazon. Unfortunately they sold out. I bought one and I was very impressed. It quickly became my favorite extender.

You can still see the original Amazon listing to see what it looks like and read about what it can do at this link:

Dennis Tillman W7PF

-----Original Message-----
From: [] On Behalf Of Alexandre Souza
Sent: Thursday, October 03, 2019 2:26 AM
Subject: Re: [TekScopes] Sanity check- is the TM500 interface spacing .150" or .156"?

I did my extender with a JAMMA edge board female connector and a JAMMA edge board used to retrofit older boards (which before JAMMA standard, every single different game had a different pinout/connector) to JAMMA standard

Works well, I have it for decades =)

Join to automatically receive all group messages.