Re: No contribution from David Hess since July 18th


Jack
 

Hi Michael....can one buy "pre-shrunk" wire (which actually means before it is shrunk but going along your lines...)to fit into the pre-shrunk heat shrink?

-----Original Message-----
From: Michael A. Terrell
Sent: Saturday, November 3, 2018 5:25 AM
To: TekScopes@groups.io
Subject: Re: [TekScopes] No contribution from David Hess since July 18th

I guess that you've never seen the heat shrink connectors for .500, .750 or larger hardline that have to be heated to allow you to slide the cable into? They are pre-shrunk.


Michael A. Terrell


-----Original Message-----
From: Dennis Tillman W7PF <dennis@ridesoft.com>
Sent: Nov 2, 2018 3:05 PM
To: TekScopes@groups.io
Subject: Re: [TekScopes] No contribution from David Hess since July 18th

Hi Raymond,

Welcome to the 21st century where our members are spread around the globe and local time is a myth and UTC is the only way to avoid confusion. But that creates its own problems as was evident in this case.

I've been caught by this before specifically when I tried to post my press release announcing "Pre-Shrunk Heat Shrink Tubing" at 12:01AM on April 1st.

Dennis Tillman W7PF




--
Jack

Join TekScopes@groups.io to automatically receive all group messages.