Re: Desoldering Iron, was Re: [TekScopes] 466-464 stray wire
Eric,toggle quoted messageShow quoted text
The venturi systems I have seen, have the venturi pump in
the base station, and suck through a 1/4 inch hose that
goes from the base station to the handset. The venturi
may have very little mass, and produce vacuum fairly
quickly, but it still has to suck air through the narrow
plastic hose that goes to the handset.
A diddly little vacuum pump, with a pressure regulator,
sucking on a vacuum receiver, and a solenoid valve in the
handset is simpler, lighter, and provides a much more
instantaneous vacuum, at the desoldering tip, than the
venturi systems I have seen.
EricJ via Groups.Io wrote: