Hi all,


I'd be willing to undertake the 3D modelling and printing with a durable nylon material if I could get my hands on a reasonable existing foot to take measurements from. I've already developed models of 465/475 and 453/454 feet that are near identical replacements for the existing feet.


In exchange for the use of your foot, I'd be happy to provide a set of nylon printed feet gratis to upgrade your existing feet. I would then make these feet available to the community through the same channels I use for my 465/475 and 453/454 feet.


PM me if interested.


Thanks,
Jeff


________________________________
From: TekScopes@groups.io <TekScopes@groups.io> on behalf of Phillip Potter <p.potter@sbcglobal.net>
Sent: Thursday, March 1, 2018 12:34 PM
To: TekScopes@groups.io
Subject: [TekScopes] Back feet for 335 scope

Hello all,

The feet on the rear of my 335 are crumbling apart, literally!

I talked to Walter at Sphere and he has nothing even close, and searches
on the net reveal nothing... so, I am coming to the group to see if
there might happen to be someone who has any extra rear feet (Tek PN
348-0425-00) or even just one, that could be spared (or loaned?) to me
as an example of a complete foot? I don't know if they could be 3-D
printed or cast, but I don't have even one that is complete... mine are
all crumbled.

Here is a picture of what it looks like (borrowed from the internet):

https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.io%2Fg%2FTekScopes%2Fphoto%2F33014%2F1%3Fp%3DName%2C%2C%2C20%2C1%2C0%2C0&;data=02%7C01%7C%7C05aca83244674dea10b308d57fb3edf0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636555333117431691&sdata=jkVB1VM59bF38UkViPqKhMk6dyRnipxuoWoNdGGID%2BY%3D&reserved=0

Thanks for any suggestion or help you can provide.

Phil