Re: Guidance w/ Tek 475


Mlynch001
 
Edited

Set all controls to the "mid Range" position. Leave the scope in "AUTO" Trigger. Set the time base to 1.0 mS and Volts to 5 V. introduce a 1Khz signal to the A channel and see if you get a trace. IF you get a trace, then set the amplitude so that the waveform fits into the vertical space of the CRT. Push the "normal trigger mode button and then adjust the trigger level until the scope locks on to the waveform.

Join TekScopes@groups.io to automatically receive all group messages.