Hi In our Observatory we are wiring and reviewing the power supply for Teenastro (2.4 main unit TMC 5160) which replaces FS2. My question is if it is worth to supply it with 12 V or with higher voltag

Hi, i updated to the last Firmware for my TA2.4.1 board. This night i frequently getting a error on the Telescope connection. Take a look at the pics. TA is connected over Ascom Device hub and after a

Hello together, I´m quite new here and I´ve assembled a TeenAstro Mini for my HQ5. Everything seems to be working fine, but when I try to do the setup for the motors and other parameters these values

Hello: I just uploaded my code to github. https://github.com/fdesvallees/TeenAstroNt This is a prototype with these main features: - Runs on FreeRTOS, which is widely supported and allows much more co

Hi, There are three files related to TeenAstro REDUX. TeenAstro_Redux-DC_v2.6.zip TeenAstro_Redux-PD_v2.6.zip TeenAstro_Redux_v2.6.zip What's the difference? Which file should I use? Thanks again. Kun

Hi. My system has an auto guider problem. It was updated from version 1.3 to version 1.4 today. When autoguider calibrating, it move only to the RA twice. It doesn't move to the DEC. So I'm back to ve

Hi all, which is the latest version of Teenastro. In the WIKI I see version 1.4.0 from 02/12/2023. Is there a newer version or is this the last one? bye Jurgen

Hi, can i modify my "old" Main Unit 2.4.1 and SHC 0.1 to a wireless SHC solution? I thought to a Bluetooth-Bridge with two HC-05 and use TX/RX on Master -Slave. I this possible? Or a better way with W

Hi All, For anyone interested, I have started this new topic. I would like to establish the interest from this group in using an ESP32-S3 for the TeenAstro. Also it would be useful to have a separate

Dear All, I realized two Teenastro 2.4 ; the first for my Vixen DX equatorial mount and it works fine ; the second to replace the FS2 control of the Cassegrain telescope (0.4m diameter) of Frasso Sabi

Hi, I would be happy if I could have some support for the ALPACA driver. I made some test and the current big main unit could work with an APACA driver and then communicate with both Focuser and Teles

Hi Charles, I tried to update from 1.3.2 to the latest version 1.4. Unfortunately it doesn't work, the *.hex and *.bin files are loaded onto the hard disk by the firmware uploader, but when I select t

Hi Charles, I'd like to recover some changes applied to my fork that were not included in your fork. So I just made a new branch on my fork (from your Release_1.4 branch) to make new pull requests, o

Hi all, I just tried to update my teenastro 2.4 mini unit with the last firmware. BE CAREFUL, I made a mistake, by selecting 2.5 TMC5160 instead of 2.4, this this mistake burned my teensy 3.2! Olivi

Hi, By the way, I updated my SHC with the last firmware, but now my screen split upside down, do you know where can I turn it correctly?

Hi Charles: Thank you for the release. I made some improvements to my test programs (mountSim / autoTest). I still need to document them, then I will upload them to github. Should I use the 1.4.0 bran

Hallo Charles, I have problems with download, because my Windows 11 system puts both driver files to quarantine. ( https://dict.leo.org/englisch-deutsch/quarantine ) Jens

Hello , I now have my Teenastro 2.4. updated with the current version of January. What I noticed: with every update from the past (so far I have made an update about 4 times since 2020) the maximum sl

Bonjour à tous, Je me présente, je m'appelle Pierre Rougé et je suis l'un des responsables d'une association d'astronome amateurs dans le Tarn. Ce club se nomme l'A.P.A.M. Nous sommes basés à Montredo

Hi, tonight i tried to setup my ta mount with phd2 again. I changed the mount but the TA is the same. After connecting i try to calibrate the guiding an always get the following error: "Das Pulse Guid