|
moderated
sticky
ASCOM driver Release 4 messages
Hello, A new Ascom driver for TeenAstro has been released: TeenAstro Ascom Driver 1.1.2. ( https://github.com/charleslemaire0/TeenAstro/blob/master/TeenAstroASCOM/TeenAstroASCOM/TeenAstro%20Telescope%
Hello, A new Ascom driver for TeenAstro has been released: TeenAstro Ascom Driver 1.1.2. ( https://github.com/charleslemaire0/TeenAstro/blob/master/TeenAstroASCOM/TeenAstroASCOM/TeenAstro%20Telescope%20Setup.exe ) The new driver support now the move axis method. ( https://ascom-standards.org/Help/Developer/html/M_ASCOM_DriverAccess_Telescope_MoveAxis.htm ) if you want to test the driver, please first uninstall the TeenAstro driver and then install the new. *Markus Noga* has implemented this feature. Thank you Markus
By Charles
·
|
|
sticky
People Speak about TeenAstro 5 messages
Sebastien presents TeenAstro on its blog. http://www.em10-usd-arduino-takahashi.eliotis.com/blog/index_files/teenastro-utilise-la-librairie-ephemeris.html Thanks Sebastien for you beautifull lib. Char
Sebastien presents TeenAstro on its blog. http://www.em10-usd-arduino-takahashi.eliotis.com/blog/index_files/teenastro-utilise-la-librairie-ephemeris.html Thanks Sebastien for you beautifull lib. Charles
By Charles
·
|
|
locked
sticky
TeenAstro and Commercial solution 16 messages
#poll-notice
A poll has been updated: Hi everyone, I have been contacted by a company to make a commercial version of TeenAstro. They can do that if they want, as the project is opened source opened hardware. Ther
A poll has been updated: Hi everyone, I have been contacted by a company to make a commercial version of TeenAstro. They can do that if they want, as the project is opened source opened hardware. There is no way to block them. But then they have to publish the changes. I have the feeling we have nothing to win in this relationship ***Should we help them or not?*** Support means : code changes/design etc... 1. Yes 2. No Vote Now: https://groups.io/g/TeenAstro/vote?pollid=16290
By Charles
·
|
|
sticky
Current Development 83 messages
The TeenAstro PCB 2.3 has a small bug: the RJ11 position is wrong.
The TeenAstro PCB 2.3 has a small bug: the RJ11 position is wrong.
By Charles
·
|
|
moderated
sticky
Firmware Release 28 messages
A new Firmware uploader has been Released ( https://github.com/charleslemaire0/TeenAstro/raw/master/Released%20data/Firmware/TeenAstroUploader_1.1.6.zip ) SHC: Some important fixes related to the New
A new Firmware uploader has been Released ( https://github.com/charleslemaire0/TeenAstro/raw/master/Released%20data/Firmware/TeenAstroUploader_1.1.6.zip ) SHC: Some important fixes related to the New Catalog Structure * Improve stability * Object Type icons are back :) * Improve speed during filtering + fix some crash during filtering If you have installed the SHC 1.1.3 please update Charles
By Charles
·
|
|
sticky
Bugs 25 messages
Please report your bugs here.
Please report your bugs here.
By Charles
·
|
|
Nouveau membre de cette fantastique communauté. 32 messages
Bonjour à tous. Laurent, 51 ans habitant dans le Haut-Rhin. Je suis nouveau membre dans ce groupe suite à une recherche que je fais depuis des semaines, à savoir motoriser la monture de mon telescope.
Bonjour à tous. Laurent, 51 ans habitant dans le Haut-Rhin. Je suis nouveau membre dans ce groupe suite à une recherche que je fais depuis des semaines, à savoir motoriser la monture de mon telescope.
|
By LaurentS
·
|
|
an old Pearl mount 4 messages
Hello I plan to drive the old Pearl mount for my 106/900 refractor with TeenAstro. I wonder if it's a Vixen GPD2 sister, so that I could use the right upgrade kit. Could any one say what I have to che
Hello I plan to drive the old Pearl mount for my 106/900 refractor with TeenAstro. I wonder if it's a Vixen GPD2 sister, so that I could use the right upgrade kit. Could any one say what I have to che
|
By Fred13115
·
|
|
Focuser 12 messages
Hello everyone, I have some questions about the focuser. It works fine with the SHC and in the web server, but it doesn't work with third-party programs like APT or NINA. What can that be? Bye Jürgen
Hello everyone, I have some questions about the focuser. It works fine with the SHC and in the web server, but it doesn't work with third-party programs like APT or NINA. What can that be? Bye Jürgen
|
By Jürgen Lemke
·
|
|
Large RTC drift 7 messages
Hello everybody, I have a hardware problem for which I cannot find solutions on the net: I have a big drift on the RTC of both of my Teenastro units. One unit is running so slow that it is loosing abo
Hello everybody, I have a hardware problem for which I cannot find solutions on the net: I have a big drift on the RTC of both of my Teenastro units. One unit is running so slow that it is loosing abo
|
By René
·
|
|
Star alignment from Park position? 6 messages
Hello everybody, is there a way to do a 2-3 star alignment starting from the Park position, instead of the Home position? For a fork mount, the home position is not convenient as it poses the risk tha
Hello everybody, is there a way to do a 2-3 star alignment starting from the Park position, instead of the Home position? For a fork mount, the home position is not convenient as it poses the risk tha
|
By René
·
|
|
gps mini 2 messages
Hi, is there a way to install a gps module into the teenastro mini?best regards katerVon meinem/meiner Galaxy gesendet
Hi, is there a way to install a gps module into the teenastro mini?best regards katerVon meinem/meiner Galaxy gesendet
|
By katerschnorr
·
|
|
Asking Help for uploading 6 messages
The pcb version can be found on the pcb. You get these declination values because of the earth refraction. Charles Envoyé à partir d’un Smarpthone Android avec GMX Mail. Le 09/02/2021, 20:40 mariomata
The pcb version can be found on the pcb. You get these declination values because of the earth refraction. Charles Envoyé à partir d’un Smarpthone Android avec GMX Mail. Le 09/02/2021, 20:40 mariomata
|
By Charles
·
|
|
More SHC 2.42" OLED DIYMORE 24 messages
Hi, I'm looking into a more integrated version of the hand controller. While I'm waiting for the 3d printer to show up on my doorstep, I modified the SHC board for my purposes. This is an FYI and once
Hi, I'm looking into a more integrated version of the hand controller. While I'm waiting for the 3d printer to show up on my doorstep, I modified the SHC board for my purposes. This is an FYI and once
|
By nc@...
·
|
|
Besoin d'un peu d'aide pour finaliser la Main Unit 19 messages
Bonjour à tous, J'arrive bientôt au bout de la grande version de Teenastro... et je bloque sur 2 ou 3 trucs : Il me reste des leds et des connectiques EBF A-3 à placer sur le PCB... mais je ne sais pa
Bonjour à tous, J'arrive bientôt au bout de la grande version de Teenastro... et je bloque sur 2 ou 3 trucs : Il me reste des leds et des connectiques EBF A-3 à placer sur le PCB... mais je ne sais pa
|
By Christian Gerault
·
|
|
Escap P530 Schrittmotore 15 messages
Hallo Zusammen, eine Fragen bezüglich der Motore: Wäre es auch möglich, ESCAP P530 mit der TeenAstro zu verwenden? Vielen Dank und schöne Grüsse, Markus
Hallo Zusammen, eine Fragen bezüglich der Motore: Wäre es auch möglich, ESCAP P530 mit der TeenAstro zu verwenden? Vielen Dank und schöne Grüsse, Markus
|
By Markus Pfeifer
·
|
|
Nouveau dans le projet TeenAstro 126 messages
Bonjour tous le monde et merci pour l'inscription. Voila je m'appel julien j'ai 40 ans et je suis nouveau dans le projet TeenAstro. Je possède un télescope BRESSER 150/750 F5 et je suis dans l'attente
Bonjour tous le monde et merci pour l'inscription. Voila je m'appel julien j'ai 40 ans et je suis nouveau dans le projet TeenAstro. Je possède un télescope BRESSER 150/750 F5 et je suis dans l'attente
|
By @MetalOS
·
|
|
PCB 8 messages
Gebe mehrere Platinen (wurden bei JLCPCB bestellt) zu TeenAstroMainUnit 2.4.1 und TeenAstroHandControler 0.1 zum Selbstkostenpreis plus Versandkosten ab.
Gebe mehrere Platinen (wurden bei JLCPCB bestellt) zu TeenAstroMainUnit 2.4.1 und TeenAstroHandControler 0.1 zum Selbstkostenpreis plus Versandkosten ab.
|
By Rolf Winkler
·
|
|
TeenAstro SuperRedux - the Definitive Edition 2 messages
Hello all I just received my last boards ! (je viens de recevoir mes dernières cartes !) more tests soon la suite bientot :)
Hello all I just received my last boards ! (je viens de recevoir mes dernières cartes !) more tests soon la suite bientot :)
|
By Ti nicO
·
|
|
SHC WLAN Access Point
Hi folks, preparing my build of version 2.4.1 with a 2.42 SHC i tried to program the Wemos D1 with firmware 1.2. It worked well, the webserver (access point) became visible, but dissapeared after a fe
Hi folks, preparing my build of version 2.4.1 with a 2.42 SHC i tried to program the Wemos D1 with firmware 1.2. It worked well, the webserver (access point) became visible, but dissapeared after a fe
|
By Kai Wicker
·
|