Taux de guidage


PhB76
 

Bonjour

J'utilise NINA pour piloter mon télescope avec l'électronique TeenAstro qui fonctionne parfaitement bien.

J'ai juste un problème pour faire la mise en station avec l'utilitaire NINA Three point polar alignment qui veut connaitre le Taux de Guidage qui ne semble pas être donné par le pilote ASCOM de TeenAstro.

La version de NINA est la 2.0 HF1 Beta 0008

Pour TeenAstro Main Unit v.1.2.4 et SHC v.1.2.6

Pilote Ascom 1.2.0.2 qui semble être le dernier?

Merci d'avance pour votre aide.


Philippe


Hello

I use NINA to drive my telescope with TeenAstro electronics which works perfectly well.

I just have a problem with the NINA Three point polar alignment utility that wants to know the Guidance Rate which does not seem to be given by the TeenAstro ASCOM driver.

The version of NINA is 2.0 HF1 Beta 0008

For TeenAstro Main Unit v.1.2.4 and SHC v.1.2.6

Ascom driver 1.2.0.2 which seems to be the latest?

Thanks in advance for your help.


Philippe


Charles
 

Oui c'est un truc que je viens de voir.
Je prépare un teenastro 1.3.0 avec un pilote ascom 1.3.0 qui se base sur ascom 6.6
Voila

--
Envoyé à partir d’un Smartphone Android avec GMX Mail.
Le 15/07/2022, 16:47 PhB76 <ph.baudouin76@...> a écrit:

Bonjour

J'utilise NINA pour piloter mon télescope avec l'électronique TeenAstro
qui fonctionne parfaitement bien.

J'ai juste un problème pour faire la mise en station avec l'utilitaire
NINA Three point polar alignment qui veut connaitre le Taux de Guidage
qui ne semble pas être donné par le pilote ASCOM de TeenAstro.

La version de NINA est la 2.0 HF1 Beta 0008

Pour TeenAstro Main Unit v.1.2.4 et SHC v.1.2.6

Pilote Ascom 1.2.0.2 qui semble être le dernier?

Merci d'avance pour votre aide.


Philippe


Hello

I use NINA to drive my telescope with TeenAstro electronics which works
perfectly well.

I just have a problem with the NINA Three point polar alignment utility
that wants to know the Guidance Rate which does not seem to be given by
the TeenAstro ASCOM driver.

The version of NINA is 2.0 HF1 Beta 0008

For TeenAstro Main Unit v.1.2.4 and SHC v.1.2.6

Ascom driver 1.2.0.2 which seems to be the latest?

Thanks in advance for your help.


Philippe








PhB76
 

Merci d'avance et bon courage

Philippe

Le 15/07/2022 à 17:01, Charles a écrit :

Oui c'est un truc que je viens de voir.
Je prépare un teenastro 1.3.0 avec un pilote ascom 1.3.0 qui se base sur ascom 6.6
Voila

--
Envoyé à partir d’un Smartphone Android avec GMX Mail.
Le 15/07/2022, 16:47 PhB76 <ph.baudouin76@...> a écrit:
Bonjour

J'utilise NINA pour piloter mon télescope avec l'électronique TeenAstro
qui fonctionne parfaitement bien.

J'ai juste un problème pour faire la mise en station avec l'utilitaire
NINA Three point polar alignment qui veut connaitre le Taux de Guidage
qui ne semble pas être donné par le pilote ASCOM de TeenAstro.

La version de NINA est la 2.0 HF1 Beta 0008

Pour TeenAstro Main Unit v.1.2.4 et SHC v.1.2.6

Pilote Ascom 1.2.0.2 qui semble être le dernier?

Merci d'avance pour votre aide.


Philippe


Hello

I use NINA to drive my telescope with TeenAstro electronics which works
perfectly well.

I just have a problem with the NINA Three point polar alignment utility
that wants to know the Guidance Rate which does not seem to be given by
the TeenAstro ASCOM driver.

The version of NINA is 2.0 HF1 Beta 0008

For TeenAstro Main Unit v.1.2.4 and SHC v.1.2.6

Ascom driver 1.2.0.2 which seems to be the latest?

Thanks in advance for your help.


Philippe








Charles
 

Hi Philippe,
 
I added the guide Rate to the ASCOM driver.
Do you know a software that use/change the rate for guiding, then we can test if it works corretly.
 
I installed NINA HF1 Beta 0008, the plate solver ASTAP, the astap star catalog and the 3 star alignment software. The latest driver I have no more error from the ASCOM.
 
Charles
 
 
Gesendet: Freitag, 15. Juli 2022 um 17:34 Uhr
Von: "PhB76" <ph.baudouin76@...>
An: TeenAstro@groups.io
Betreff: Re: [TeenAstro] Taux de guidage

Merci d'avance et bon courage

Philippe

Le 15/07/2022 à 17:01, Charles a écrit :

Oui c'est un truc que je viens de voir.
Je prépare un teenastro 1.3.0 avec un pilote ascom 1.3.0 qui se base sur ascom 6.6
Voila

--
Envoyé à partir d’un Smartphone Android avec GMX Mail.
Le 15/07/2022, 16:47 PhB76 <ph.baudouin76@...> a écrit:
Bonjour

J'utilise NINA pour piloter mon télescope avec l'électronique TeenAstro
qui fonctionne parfaitement bien.

J'ai juste un problème pour faire la mise en station avec l'utilitaire
NINA Three point polar alignment qui veut connaitre le Taux de Guidage
qui ne semble pas être donné par le pilote ASCOM de TeenAstro.

La version de NINA est la 2.0 HF1 Beta 0008

Pour TeenAstro Main Unit v.1.2.4 et SHC v.1.2.6

Pilote Ascom 1.2.0.2 qui semble être le dernier?

Merci d'avance pour votre aide.


Philippe


Hello

I use NINA to drive my telescope with TeenAstro electronics which works
perfectly well.

I just have a problem with the NINA Three point polar alignment utility
that wants to know the Guidance Rate which does not seem to be given by
the TeenAstro ASCOM driver.

The version of NINA is 2.0 HF1 Beta 0008

For TeenAstro Main Unit v.1.2.4 and SHC v.1.2.6

Ascom driver 1.2.0.2 which seems to be the latest?

Thanks in advance for your help.


Philippe






 


sebastien@...
 

Bonjour Charles, 

La version 1.3.0 du driver ASCOM est-elle téléchargeable pour pouvoir la tester ?

Merci à toi,

Seb.


Charles
 

I have some small feature to implement then I will release.
Maybe this evening
 
Charles
 
 
Gesendet: Sonntag, 07. August 2022 um 12:50 Uhr
Von: sebastien@...
An: TeenAstro@groups.io
Betreff: Re: [TeenAstro] Taux de guidage

Bonjour Charles, 
 

La version 1.3.0 du driver ASCOM est-elle téléchargeable pour pouvoir la tester ?
 

Merci à toi,

Seb.


Martin Junius
 

Hi Charles, 
Speaking of Ascom driver update: will the new version support multiple clients, to avoid the extra Device Hub/POTH layer? 

Liebe Grüße
Martin Junius
via eiföhn

Am 07.08.2022 um 13:11 schrieb Charles <Charles_Lemaire@...>:


I have some small feature to implement then I will release.
Maybe this evening
 
Charles
 
 
Gesendet: Sonntag, 07. August 2022 um 12:50 Uhr
Von: sebastien@...
An: TeenAstro@groups.io
Betreff: Re: [TeenAstro] Taux de guidage

Bonjour Charles, 
 

La version 1.3.0 du driver ASCOM est-elle téléchargeable pour pouvoir la tester ?
 

Merci à toi,

Seb.


Charles
 

Hallo Martin,
 
Ich habe es leid nicht geändert. Du brauchst noch den ASCOM HUB der POTH gibt es nicht mehr...
Warum stör es dir den HUB zu benutzen? Ich verstehe es nicht ganz?
 
Charles
 
 
Gesendet: Sonntag, 07. August 2022 um 16:03 Uhr
Von: "Martin Junius" <y05@...>
An: TeenAstro@groups.io
Betreff: Re: [TeenAstro] Taux de guidage
Hi Charles, 
Speaking of Ascom driver update: will the new version support multiple clients, to avoid the extra Device Hub/POTH layer? 
 
Liebe Grüße
Martin Junius
via eiföhn
 

Am 07.08.2022 um 13:11 schrieb Charles <Charles_Lemaire@...>:
 

I have some small feature to implement then I will release.
Maybe this evening
 
Charles
 
 
Gesendet: Sonntag, 07. August 2022 um 12:50 Uhr
Von: sebastien@...
An: TeenAstro@groups.io
Betreff: Re: [TeenAstro] Taux de guidage

Bonjour Charles, 
 

La version 1.3.0 du driver ASCOM est-elle téléchargeable pour pouvoir la tester ?
 

Merci à toi,

Seb.


Martin Junius
 

Hi Charles,

es ist halt viel übersichtlicher, ohne den Device Hub direkt zugreifen zu können, z.B. bei EQASCOM oder dem 10micron ASCOM-Treiber. Normalerweise habe ich immer drei Programme, die parallel auf die Teleskop-Schnittstelle zugreifen: NINA, PhD, CdC

Liebe Grüße
Martin



Am 07.08.2022 um 21:16 schrieb Charles:

Hallo Martin,
Ich habe es leid nicht geändert. Du brauchst noch den ASCOM HUB der POTH gibt es nicht mehr...
Warum stör es dir den HUB zu benutzen? Ich verstehe es nicht ganz?
Charles
*Gesendet:* Sonntag, 07. August 2022 um 16:03 Uhr
*Von:* "Martin Junius" <y05@...>
*An:* TeenAstro@groups.io
*Betreff:* Re: [TeenAstro] Taux de guidage
Hi Charles,
Speaking of Ascom driver update: will the new version support multiple clients, to avoid the extra Device Hub/POTH layer?
Liebe Grüße
Martin Junius
via eiföhn
Am 07.08.2022 um 13:11 schrieb Charles <Charles_Lemaire@...>:

I have some small feature to implement then I will release.
Maybe this evening
Charles
*Gesendet:* Sonntag, 07. August 2022 um 12:50 Uhr
*Von:* sebastien@...
*An:* TeenAstro@groups.io
*Betreff:* Re: [TeenAstro] Taux de guidage
Bonjour Charles,
La version 1.3.0 du driver ASCOM est-elle téléchargeable pour
pouvoir la tester ?
Merci à toi,
Seb.


manumanu2525
 

Dear all,
I just finished debugging the hardware of a Mini Teenastro with HC OLED 2.4 on a Losmandy GM8 and tried autoguiding.
I used "Device hub" to drive the scope with MaximDL and guide with PHD guiding 2 in the same time.
It is not as convinient as EQASCOM as Martin said but Teenastro is freeware.
I had issues with PHD guiding 2 because "pulse guide failure".
Do you have any idea why?
CS
Emmanuel


Charles
 

Versions?


Le jeu. 24 nov. 2022, 12:13, manumanu2525 <manumanu2525@...> a écrit :
Dear all,
I just finished debugging the hardware of a Mini Teenastro with HC OLED 2.4 on a Losmandy GM8 and tried autoguiding.
I used "Device hub" to drive the scope with MaximDL and guide with PHD guiding 2 in the same time.
It is not as convinient as EQASCOM as Martin said but Teenastro is freeware.
I had issues with PHD guiding 2 because "pulse guide failure".
Do you have any idea why?
CS
Emmanuel


manumanu2525
 

Hello,
all us uptodate since several days:
Maint Unit is 1.3.6 and HC is 1.3.4. ASCOM platform 6.6
On PHD guiding 2 the guiding rate is seen 0.1 despite it is 0.5. When I force it to 0.5 on the parameters of PHD guiding, the rate change back to 0.1. So this wrong rate is sent by the ASCOM driver.
Thank you


Charles
 

I check this this week-end 


Le jeu. 8 déc. 2022, 17:31, manumanu2525 <manumanu2525@...> a écrit :
Hello,
all us uptodate since several days:
Maint Unit is 1.3.6 and HC is 1.3.4. ASCOM platform 6.6
On PHD guiding 2 the guiding rate is seen 0.1 despite it is 0.5. When I force it to 0.5 on the parameters of PHD guiding, the rate change back to 0.1. So this wrong rate is sent by the ASCOM driver.
Thank you


Charles
 

take a look on this for me it sounds like PHD2 doesn't set the guiding speed
https://openphdguiding.org/man-dev/Basic_use.htm#:~:text=The%20guide%20speed%20is%20a,of%200.5x%20%2D%201x%20sidereal.
If you want to change the guiding speed you can use either the SHC or the webserver
Charles

Am Do., 8. Dez. 2022 um 17:31 Uhr schrieb manumanu2525 <manumanu2525@...>:

Hello,
all us uptodate since several days:
Maint Unit is 1.3.6 and HC is 1.3.4. ASCOM platform 6.6
On PHD guiding 2 the guiding rate is seen 0.1 despite it is 0.5. When I force it to 0.5 on the parameters of PHD guiding, the rate change back to 0.1. So this wrong rate is sent by the ASCOM driver.
Thank you


manumanu2525
 

Hello,
There is a misunderstanding.
I use PHD since 10 years
PHD guiding must know the guiding speed of the Teenastro. And the ASCOM driver send 0.1 to PHD despite the speed I set is the classic 0.5.
Could somebody check the guiding speed sent by the  ASCOM driver. Otherwise no guiding possible. Clear Sky


Charles
 

Thanks for the clarification. where can I see the value send back by the ascon driver in PHD


Le sam. 10 déc. 2022, 21:45, manumanu2525 <manumanu2525@...> a écrit :
Hello,
There is a misunderstanding.
I use PHD since 10 years
PHD guiding must know the guiding speed of the Teenastro. And the ASCOM driver send 0.1 to PHD despite the speed I set is the classic 0.5.
Could somebody check the guiding speed sent by the  ASCOM driver. Otherwise no guiding possible. Clear Sky


Davide Fava
 

Now there is ascom platform 6.6 Sp1. In the release note they say about some changes/fixes on device hub, maybe is this the problem or the solution?

From: TeenAstro@groups.io <TeenAstro@groups.io> on behalf of Charles <charleslemaire37@...>
Sent: Sunday, December 11, 2022 8:46:32 AM
To: TeenAstro@groups.io <TeenAstro@groups.io>
Subject: Re: [TeenAstro] Taux de guidage
 
Thanks for the clarification. where can I see the value send back by the ascon driver in PHD

Le sam. 10 déc. 2022, 21:45, manumanu2525 <manumanu2525@...> a écrit :

Hello,
There is a misunderstanding.
I use PHD since 10 years
PHD guiding must know the guiding speed of the Teenastro. And the ASCOM driver send 0.1 to PHD despite the speed I set is the classic 0.5.
Could somebody check the guiding speed sent by the  ASCOM driver. Otherwise no guiding possible. Clear Sky


Charles
 

Hi,

I am using the ASCOM 6.6 SP1 when I connect to the device hub and take a look into the Static properties, I can see that the guide rate are applied.
For this screenshot I set 0.25X in TeenAstro

image.png

Am So., 11. Dez. 2022 um 10:18 Uhr schrieb Davide Fava <davide.fava@...>:

Now there is ascom platform 6.6 Sp1. In the release note they say about some changes/fixes on device hub, maybe is this the problem or the solution?

From: TeenAstro@groups.io <TeenAstro@groups.io> on behalf of Charles <charleslemaire37@...>
Sent: Sunday, December 11, 2022 8:46:32 AM
To: TeenAstro@groups.io <TeenAstro@groups.io>
Subject: Re: [TeenAstro] Taux de guidage
 
Thanks for the clarification. where can I see the value send back by the ascon driver in PHD

Le sam. 10 déc. 2022, 21:45, manumanu2525 <manumanu2525@...> a écrit :
Hello,
There is a misunderstanding.
I use PHD since 10 years
PHD guiding must know the guiding speed of the Teenastro. And the ASCOM driver send 0.1 to PHD despite the speed I set is the classic 0.5.
Could somebody check the guiding speed sent by the  ASCOM driver. Otherwise no guiding possible. Clear Sky


manumanu2525
 

Hello
Sorry I am on vacation. I send to you the screenshot of PHD on the 16th when back home.
Clear skies


manumanu2525
 

Hello,
I did update the Main unit firmware so it is 1.3.7. SHC is 1.3.2. ASCOM is 6.6 SP1. Win 10.
I am connecting with serial port to TeenAstro with or without hub it's same issue.

I have the same bug: The guiding speed sent by the ASCOM driver is 0.1 not 0.5.
Please see the screen shots. The config of 0.5 and the answer on PHD guiding is 0.1 And I can change it because going back to 0.1 (I assume that the driver cancels my manual settings)!
In  PHDGuiding there is also a "Pulse guiding" not possible.
Could you help me?
Thanks

Emmanuel