Hi François, I think you just need to select the ESP32 branch. The changes are not committed to the Master branch yet. Cheers Archie On Fri, Feb 3, 2023 at 3:27 AM François Desvallées via groups.io <f

#poll #poll-notice

Thank you Tong for all your explanations and diagrams This is very explicit Envoyé depuis l'application Mail Orange ---------------- De : Tong <detangwu@...> Envoyé : jeudi 02 février 2023 13:

Hi John and congratulations for the PCB, it looks very good. For the HAL, I had a look at the Onstep version and I think we can do something similar. I will propose something this week-end. Some quest

#poll #poll-notice

Great Job Nico ! Guys have you all noticed the other changes ? No more header to weld on the main board (it seems that the pcb is mostly with CMS or SMD components, so it can be bought more or less as

Hi Ti nicO My profession is engaged in food manufacturing, not electronics, but it can operate stably. ha-ha Tong

@tong Your design is not reliable You can't drop pcb into the wild like this More precise answer later (after work)

Hello Boris Yes, I used a closed loop motor, which works well at present. The ST4 interface has been restored. You can also change Type C to your preferred interface. The PCB file can be edited. PS: D

Hello Tong I thank you for your reply. You did a good job. ok I send you the dimensions of a pcb. But I think yours is enough. the type c connection may seem light, but interesting for an integration.

Hello Fred Many people still need to use st4. After I add the st4 interface back, I will share my PCB with you. When downloading TeenAstro firmware, I select TMC5160. Please leave all the rest to the

Hello Boris It has the same function as 2.4.1. I canceled ST4, but I can add it back if you need it. If you give me the size you need, I will help you design a suitable PCB. This is part of the photo

Hi All, ESP32 Hardware I have taken on-board the suggestions regarding the hardware design. The DS1307 has now been replaced with a DS3231-onboard or a DS3231forPI module. The code now includes this u

#poll #poll-notice

Hi, I will add a "generic" driver then this firmware knows that it can set the current. Probably it I'd better to select the driver at run time and not at compile time. Charles

Hello Tong This is a very interesting point of view, especially when one design a mount from scratch. Would you share the pcb and the wires shematic you've designed, if you please ? When one downloads

Hello Tong I am interested in your integration work. Because I'm upgrading an Em200 mount. the current map is too big. do you have pictures? are the current functions of teenastro preserved? Boris Env

Hello Fred Send the stp and dir signals of TeenAstro to the closed-loop driver for processing without changing the code of TeenAstro. I recommend you to use the closed-loop drive. It is much easier to

Ti nicO, About MKS servos, i guess it doesen't need any firmware uptade. In my case, I already use them on a 3d printer, they have to be plugged in place of the stepper drivers board (A8835 pcb format

Hello Tong, When you write you've been using it, do you mean with TeenAstro or with something else ? What is the pcb you've designed for ? And what about the code ? Fred

No discarded, just not tested yet And it requires change in code to support it De : TeenAstro@groups.io <TeenAstro@groups.io> De la part de Fred13115 Envoyé : mardi 31 janvier 2023 13:30 À : TeenAstro

Hello I agree with Tong : this closed loop motor looks like a very compact solution to many problems. What is the reason to discard it ? Fred

Hi everybody, About autoguiding I would ask if anyone experienced an error with phd2 that i never had before. I have the same equipment sonce a while but now after updates of many software and firmwar