Hi Charles, here my two cents. First of all it would be very interesting to get to know other Teenastro users and their solutions. I would also suggest the following points: Changes made to localize

Bonjour Charles, C’est commandé 5 mini et 5 SHC.. Il y aura du rab pour certains éventuellement. Je vais déjà en construire un pour ma G11 et probablement un autre pour une ES PMC8 EXO-2.

TeenAstro user meeting at the RAP 2020 When: Thursday, 21 May 2020 through Sunday, 24 May 2020 Where: Craponne sur Arzon (Haute Loire) FRANCE Organizer:

To everyone: As I am a bit lost in the "ordering" process please confirm again if you need a pcb and how many. I have 8 mini kit left. The 3D print are in production :) the packet for Lukas is already

Hi James, I need your adress... Charles

Salut Eric, si tu en veux 5 c'est mieux que tu les commandes directement chez JLCPCB. amicalement. Charles Gesendet: Freitag, 21. Februar 2020 um 03:17 Uhr Von: "Eric Harant"

Hallo Detlef, The platine has arrived... do you need a pcb? Charles Gesendet: Dienstag, 11. Februar 2020 um 21:13 Uhr Von: "Detlef" <info@...> An: TeenAstro@groups.io Betreff: Re: [TeenAstro]

OK I will buy a master slave module Envoyé à partir d’un Smarpthone Android avec GMX Mail. Le 26/02/2020, 07:06 Tong <detangwu@...> a écrit:

Hi Charles, Please order a bluetooth module with master-slave mode to bind to each other.I have many kinds of electronic parts and modules because the freight is too expensive to send to

Hi, I will travel to the ATT, I will take the 08.05.2020 as PTO. Now we have to find an accommodation for the user meeting and define a program. Any suggestions are welcome. Charles Envoyé à

Hi Tong, Just a question to be sure I really understand your situation. When you use TeenAstro with cable everything works as expected and you are satisfied with the functionalities. BUT you want to

Hi Lukas, You do not need to understand the TMCStepper lib to configure your motor. The import parameter are: The gear configuration to get the physical description of your mount The Max rate, the

Hi Lukas: Yes, I did write the INDI driver. I will send you the (not quite ready) TAConfig.py program by separate email. For your remote control observatory, you might consider the Kstars / Ekos

Thank you very much for your input to both of you, Charles and François. I have two telescope mounts I target to control by TeenAstro. One is a EQ6 with portescap disk magnet motors and the other is

Sorry Francois, I forgot your commands list! Charles Gesendet: Montag, 24. Februar 2020 um 08:11 Uhr Von: "François Desvallées" <fdesvallees@...> An: TeenAstro@groups.io Betreff: Re: [TeenAstro]

"I had set CPU speed to 72MHz and Optimize to "Faster", is that right?" I haven't checked my settings but I would say yes. "As there is no other branch nor any tag set, I used the git master head;

Hi Lukas: I use Linux too, welcome to the community! One of the nice things about TeenAstro is that most parameters can be changed at run time, so a single binary will work for most configurations.

I already posted that I had assembled a TeenAstro Mini and it looks like working. As I am a Linux guy and want to be able to hack on the software, I don't want to use the prebuilt firmwares and

I will put both components in the list Envoyé à partir d’un Smarpthone Android avec GMX Mail. Le 22/02/2020, 12:37 luzilu@... a écrit:

Hello I kindly got PCBs from Charles and have soldered the parts together for a TeenAstro Mini you can see below. I built the software from source from github and can communicate via LX200. So far a