I am trying to use my d700a with yaac or another aprs program to receive and transmit aprs packets. Everything is set correctly and I can receive packets correctly. However I cannot transmit. The soft

I am trying to connect my tmd700a with my aprs client yaac and am getting an error message that the com port cannot open. I have a straight through rs232 cable connecting the radio to the computer as

Have had a Yaesu FTM-350AR for years and decided to come back to Kenwood. Now I have the Kenwood TM-D710G and the radio seems to be great except for the display. Have not found a way to make the Memor

Ok. I’m sure it’s easy but I can’t figure out how to put the TM-D700 into 9600 baud packet. No issues with APRS 9600, not able to access 9600 packet. Any help appreciated. Set 9600 in the software pro

I own three D700 radios and bought them new many years ago. I recently ran into a problem with one of them when I could no longer turn it on via the power button. At first the display would turn on wi

My D-700 Mobile SatGate quit forwarding the ISS DIGI to the Terrestrial network. I see everything from the ISS but my radio forwards nothing. I went through all my settings and I can't see any error.

I don't normally forward commercial emails, but I've bought from this company before and they just released a new seat bolt mount for the Kenwood D710 & V71 radio control head. I figured it was releva

I’m looking for advice concerning a choice between my old D700 and a new D710. I'm getting a new car and plan to install one of these 2 radios in it. The D700 still works fine, so I could use it. But

I have a TM-D710A in a fixed station. I hadn't exercised the APRS in a while and decided to transmit a few packets. I hit BCON and no TX. I'm not using a GPS and have it set to use a single location.

I'm looking at jumping several generations ahead in technology and replacing my old faithful Yaseu FT7900 dual-band FM transceiver with the TMD710A. I assume the 710A has the capability of storing mem

I use my TM-D710G for numerous purposes, including APRS & Winlink. At present, I have different configuration files saved in the MCP-6A memory control program directory and download those to my radio

You may need to navigate to the group website to remove yourself. You may have signed-up with a password that is required to "unsubscribe" you. Unless an administrator of the list sees your message, s

Hello, My son dropped his TM-D710 control head and broke off one of the right-hand knobs. I am looking for the part number and source for the knob module. (Also replacement knobs...) Thanks in advance

Hi While I was servicing my venerable D700A, I inadvertently broke the ribbon cable connector on the main rxtx board which connects to the tnc board, I checked with pacparts.com and they do stock the

My 18 month old Kenwood TM-D710GA radio "decided" this past week that it didn't want to work in APRS12 TNC or PACKET TNC anymore. I had never gotten around to using this radio in digital modes until I

Anyone know of software to control the TM-D710G? Thank you 73 Emory WM3M

I am pretty much certain that I have carefully read the Scan section of the D710 PDF. When I try to scan, all I get is scan through whatever frequency I am on. ....118.5 (from a lower-limit) . I will

Correction to my last reply. I listed the wrong GPS. It is the unit with the serial cable. Garmin 18x PC GPS Navigator Unit https://www.amazon.com/Garmin-18x-GPS-Navigator-Unit/dp/B0016NYHVS/ref=sr_1_

So Finally transferring my D710 to my new truck, and I am looking for a better solution for the GPS unit. Currently I have a hacked together Magnetic GPS unit that I threw together with a small breadb

FOR SALE: TM-D700A I've been using this mobile in my truck for several years. Works perfectly. I want to go with a digital mobile so I want to sell the KenWood. I have found the original Box! Still lo