Hello Leoanrd , now that you have the unlocking information per your request by Yono YD0NXX , here is a program that works well with that radio. ------------------------------- The program detailed be

There are other mods for this radio that I am referring to. 73 from Bill - WD8ARZ South Bend, Indiana expecting snow storm tomorrow Saturday On 11/20/2015 6:19 AM, WD8ARZ wd8arz@... [TMD700A] wrote: W

My Band A on my D700a is not receiving well anymore. I get some audio but there is a garbled noise coming out on top of it as well. I believe there is a problem in the multiplexor. Anyone have ideas?

I am currently doing a new install of a tmd710g in my pickup. I was hoping to use an iPad mini I had lying around for my map display. Has anyone found a cable/app configuration for accomplishing this?

Hi all, I have a TMD700 here, that when you turn off all of the settings disappear. I found there is a small Panasonic battery - which I have replaced. But it still does the same. Has anyone else had

That has nothing to do with the features and operations specific to actually getting SkyCommand functional. Have changed the subject header to fit your comments. It is likely that now we will see a lo

Cross banding a base, portable or mobile dual band radio brings valuable operation for low power stations and rubber duck antenna systems. Really helps extend the battery life of HT's for example, as

Group: Does anyone have a good set of instructions for setting up the TM-D700A for cross-band ("X-Band") operation? I find the manual's coverage of this topic very sparse and terse. Any help appreciat

Make sure your power supply is at 13.8 volts and the antenna output is terminated into a resistive load. Also check the crimp connections on all the fuses. Seen several develop a resistance and get wa

I think I need to send my Kenwood TM-D700A in for service, as I'm getting lower than rated output on both VHF (max of 35-40 watts) and UHF (max 10 watts) on the "High" power output setting. I suspect,

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the TMD700A group. File : /K9DCI's Excel CAT & Beginner Guide & Mic quick guide/APRS Begi

just to let everyone know i should have known better to send a moneyorder and got ripped off for buying a d700 head uni, while doing some checking this is what i found . SCAM ALERT : THERE IS A SCAMME

just to let everyone know i have bought a head unit from someone on the group for my tm-700a thanks for everyone who read my request

Does anyone have a tutorial or video on setting up memory groups with the TM D710a. When I'm out of town I would like to have my group for where I am so all I scan is that group. Thanks 73 Mike VE7MKD

With the recent demise of my GPS, I am looking at using my 700 as a base station, and getting a 710. Is their someone that has both that would be willing to contact me off list? I am especially intere

Is there a setting to inhibit the APRS beacon when the second receiver is receiving a station. It is kind of annoying to have a conversation when the beacon goes off and the other receiver blanks out.

Good afternoon. I have a D710 mobile, and in the last month have had problems with it repetitively restarting - goes to the startup screen then back to normal state. First time I was stationary with t

Yes. The D700 can be programmed and operated via computer-serial port. It can also be operated WITHOUT a control head via the serial port. I think someone else made a computer mirrored control head, b

HELLO ALL I HAVE A TM-D700A MAIN UNIT BUT I NEED A HEAD UNIT DOES ANYONE HAVE FOR NOT TOO MUCH MONEY THANKS PAUL N3TMX

Hello, My D710 recently has lost it's RX sensitivity. I have swapped the antenna out (on the NMO side, so it used the same cable and connectors), and it did not change. The SWR is the same as it alway