|
Antenna ports? 3 messages
I just ordered my TM-D700A yesterday but neglected to ask about the antenna connectors. Neither the QST ads nor the Kenwood website says whether there are one or two connectors, and I didn't ask. Pers
I just ordered my TM-D700A yesterday but neglected to ask about the antenna connectors. Neither the QST ads nor the Kenwood website says whether there are one or two connectors, and I didn't ask. Pers
|
By
ellistr@...
·
|
|
demodulators 2 messages
I will be ordering a TMD700A next week, and I am also setting up a mobile emwin station. The 9600 baud demodulator must be connected directly to the discriminator of a receiver. Is this option availab
I will be ordering a TMD700A next week, and I am also setting up a mobile emwin station. The 9600 baud demodulator must be connected directly to the discriminator of a receiver. Is this option availab
|
By
rotate@...
·
|
|
mods?> 2 messages
are there any mods for the d700 thanks robert
are there any mods for the d700 thanks robert
|
By
r.voerman@...
·
|
|
More rx-mods?
Is there perhaps any more (rx)mods for the TM-D700E? RX up to 1.2 GHz like the USA/Canada version?? Have removed (W601) resistor and (W602)green wire. Receiving 136-200 MHz + 400-524 MHz tage@...
Is there perhaps any more (rx)mods for the TM-D700E? RX up to 1.2 GHz like the USA/Canada version?? Have removed (W601) resistor and (W602)green wire. Receiving 136-200 MHz + 400-524 MHz tage@...
|
By
Tage Åbacka
·
|
|
VB: More rx-mods?
----- Original Message ----- From: tage To: TMD700A@... Sent: Tuesday, March 21, 2000 1:37 AM Subject: More rx-mods? Is there perhaps any more (rx)mods for the TM-D700E? RX up to 1.2 GHz like the USA/
----- Original Message ----- From: tage To: TMD700A@... Sent: Tuesday, March 21, 2000 1:37 AM Subject: More rx-mods? Is there perhaps any more (rx)mods for the TM-D700E? RX up to 1.2 GHz like the USA/
|
By
Tage Åbacka
·
|
|
Crossband repeater
Does anyone knows how to put an TM-d700 into the cross-band ?
Does anyone knows how to put an TM-d700 into the cross-band ?
|
By
pe0gjv@...
·
|
|
How to view my messages? 5 messages
This is a basic question that seems to have me stumped. How do I view APRS messages addressed specifically to me on my TMD700?
This is a basic question that seems to have me stumped. How do I view APRS messages addressed specifically to me on my TMD700?
|
By
Gary Young
·
|
|
Stand alone Tracker help needed 3 messages
I would like to put one of these rigs in my car as a stand alone tracker with regular lat/lon beacon x-missions. What settings would I need to set up in my radio for this. I have been tinkering around
I would like to put one of these rigs in my car as a stand alone tracker with regular lat/lon beacon x-missions. What settings would I need to set up in my radio for this. I have been tinkering around
|
By
d700@...
·
|
|
Time change & the D700 2 messages
After daylight savings time went into effect, I changed my UTC offset on the D700 to -6 rather than -7 (for Utah). When I push POS I get my correct local time. However, when I look at the time any pac
After daylight savings time went into effect, I changed my UTC offset on the D700 to -6 rather than -7 (for Utah). When I push POS I get my correct local time. However, when I look at the time any pac
|
By
Thomas M. Schaefer
·
|
|
Aircraft band 2 messages
Is it possible to receive AM aircraft on Band A? I know you cannot in Band B, but I thought Band A would allow it? When I change bands with the VFO (F + Knob A), it only cycles through 144 and 220. An
Is it possible to receive AM aircraft on Band A? I know you cannot in Band B, but I thought Band A would allow it? When I change bands with the VFO (F + Knob A), it only cycles through 144 and 220. An
|
By
Thomas M. Schaefer
·
|
|
How to activate crossban repeater in the tm-d700e version?
Hello, Who knows to activate crossband repeater in the E version? cu Robert http://members1.chello.nl/~r.voerman/
Hello, Who knows to activate crossband repeater in the E version? cu Robert http://members1.chello.nl/~r.voerman/
|
By
r.voerman@...
·
|
|
GPS 2 messages
I am using a laptop computer (WinAprs) and GPS with my TM-D700A in TNC mode. I cannot get it to track me, or recognize my GPS any help on this would be appreciated. w4ksc@...
I am using a laptop computer (WinAprs) and GPS with my TM-D700A in TNC mode. I cannot get it to track me, or recognize my GPS any help on this would be appreciated. w4ksc@...
|
By Darrell
·
|
|
Performance 2 messages
Hi. I am new to the list and didn't see the following issues addressed in the archives. I am considering purchasing a TM-D700. Can anyone comment on how fast the scan speed is, how resistant to front
Hi. I am new to the list and didn't see the following issues addressed in the archives. I am considering purchasing a TM-D700. Can anyone comment on how fast the scan speed is, how resistant to front
|
By
J & D Schnoor
·
|
|
Squelch tail
Ok one complaint. The squelch tail after receiving a transmission seems a bit long, at least longer than the Yeasu I am used to. Any way to shorten it. Adjusting the squelch does not seen to have any
Ok one complaint. The squelch tail after receiving a transmission seems a bit long, at least longer than the Yeasu I am used to. Any way to shorten it. Adjusting the squelch does not seen to have any
|
By
Timothy McGowen
·
|
|
Trouble sending APRS beacon 2 messages
Ok First, This is all new to me. So far I love my new radio. I can receive the APRS packets just fine, well everyone's except mine. That would lend me to believe that I am not "sending" them. I have d
Ok First, This is all new to me. So far I love my new radio. I can receive the APRS packets just fine, well everyone's except mine. That would lend me to believe that I am not "sending" them. I have d
|
By
Timothy McGowen
·
|
|
D7 & D700 KISS mode?
I have tried to use both my D7 and D700 in kiss mode. They both seem to receive OK but TX does not seem to work correctly.. I have tried both at 9600 and 1200. Is this a known problem? Thanks, Scott k
I have tried to use both my D7 and D700 in kiss mode. They both seem to receive OK but TX does not seem to work correctly.. I have tried both at 9600 and 1200. Is this a known problem? Thanks, Scott k
|
By
Scott Weis
·
|
|
RAMTEST 5 messages
Hello, 1. With TNC in PKT Mode: When entering "RAMTEST" in the terminalprogramm I will get the message: ... ERROR ADDRESS 000def0f 128 KBytes OK Is this normal, or I have realy a memory-error? 2. With
Hello, 1. With TNC in PKT Mode: When entering "RAMTEST" in the terminalprogramm I will get the message: ... ERROR ADDRESS 000def0f 128 KBytes OK Is this normal, or I have realy a memory-error? 2. With
|
By
Thomas Lindner
·
|
|
Cross band repeat (was ram test)
Unfortunately this function has been disabled on European market radios. Even after performing the Wide Band mod the repeater menu does not appear. What we EURO folks need to know is the magic diode/r
Unfortunately this function has been disabled on European market radios. Even after performing the Wide Band mod the repeater menu does not appear. What we EURO folks need to know is the magic diode/r
|
By
Simon French
·
|
|
i hav q? 2 messages
hi all i d like to ask Q? what abut dx cluster monitoring can you see it in all the lcd or just part from lcd????? ________________________________________________________________________ Get Your Pri
hi all i d like to ask Q? what abut dx cluster monitoring can you see it in all the lcd or just part from lcd????? ________________________________________________________________________ Get Your Pri
|
By
ajeele ajeele
·
|
|
[ Cross band repeat (was ram test)]
Think the European firmware version is different, it is not a matter of removing diodes. Maybe there is a possibility of "upgrading" the firmware?? Regards, Dick PA3DUV "Simon French" <simon@...> wrot
Think the European firmware version is different, it is not a matter of removing diodes. Maybe there is a possibility of "upgrading" the firmware?? Regards, Dick PA3DUV "Simon French" <simon@...> wrot
|
By
Dick Knol
·
|