Hello, I am new to this group. I have been working several days on this problem. When I hookup either a Windows or Linux PC to the radio via a FTDI USB to Com cable, I get this dump when I switch to t

Does the TM-D710 have GPS receiver built in, or, does it require a separate GPS receiver connected via cable to the D710?

What are the recommendations for APRS map display with the 710G?

The connecting cable from the head to the radio has exactly the same ends on it. Apparently on the 700 they were different. Does anyone know what able is needed for connecting the head to the radio? I

TM-D700A keyboard. I searched this group and came up with messages from years ago for W2FS interface between a keyboard and the TM-D700. I know these are old radios but I just picked up two more. I lo

I have two TM-D710G radios, one mobile and one in my shack. For APRS beaconing I want to designate one radio with my call sign as K3MEJ-0 and the other as K3MEJ-1. When I try to program the radio manu

I just purchased a TM-D700, it powers on and both busy lights are lit and will not go out even with sq at full clock wise. No xmit or receive, no audio out of speaker. All controls seem to work, you c

How to I configure my D700 to transmit on the output of our local repeater?. Our repeater went down and everyone was instructed to go simplex on the repeater output freq. this is for a temporary basis

I would like to lock out a memory channel but am having difficulty getting it to happen. Is there a quick and easy answer how to solve this problem on a temporary basis?

When an APRS beacon or status is received, the D700 briefly displays (a half-screen of) info about the received becon. Also, a button choice to show the "detail" of the beacon appears. Pushing this sh

hello group i am trying to program my 700a with the mcp700 software.i am trying to use a db9 cable to a keyspan usb adapter.the key span driver is properly installed,the mcp700 software is properly in

My D700 attached to a Windows XP ran UI-View32 and programming via the MCP without issues via an RS232/USB adapter. That laptop died, and I can't make a connection with either my Windows 7 or Windows

I need to replace fuse 901 part # F53-0108-05 on my TMD700A. It's blown. I am not used to working with surface mount devices. I would like to use a wired fuse to solder over the existing surface mount

Includes Mic Radio Power cable Mobile mounting bracket NO CONTROL HEAD $225 shipped to any US zipcode. email me direct k1lpi@... Paypal or Zelle for payment.

Anyone know what the "going rate" would be for a fully-functioning Kenwood TM-D700A rig? I have one, working fine, but would like to "upgrade" to the TM-D710X series, and would like to sell this one f

Hi all, Picked one of these up at Dayton this past weekend and got it installed in my vehicle. Have a few questions: - If I am in memory mode, is there a way to display the memory name vs. the frequen

Hello all, I just transitioned over from the ™-D700 yahoo group. It seems that messages are not getting to or from there for some time. Anyway, a little about me… My name is Eric. The call is n7zzt. I

All, A new problem exists in my many years old TM-D710A transceiver. Some information: Band A (left) set to APRS - 144.390 MHz. Band B (right) set to local repeater - 147.165+ with 167.9 Hz tone - mem

All, A new problem exists in my many years old TM-D710A transceiver. Some information: Band A (left) set to APRS - 144.390 MHz. Band B (right) set to local repeater - 147.165+ with 167.9 Hz tone - mem

I finally managed to gain access to the files section of Yahoo Groups to download the files and post them to the new group. https://groups.io/g/TMD700A/files Regards, Tom NY4I 727-437-2771