Hello, I have an older d-710a that I recently acquired. I am having trouble figuring out the group scan/ group link features. The manuals are less helpful than I need. Anyone have experience with thes

set Ch B to that QRG and 9600b but was running through AGWPE and figured that was wrong protocol. Or I set the Rig up incorrectly. I can ask over on AMSAT but thought there may be another D710 using f

I am also using APRSIS32. However quite a while back I asked this and never heard from anyone over there. I have menu 616 Digipeat set "on" so here is a snip from the Digipeat log of APRSIS32 --------

The TM-D700 is supposed to have a feature where when someone enters the frequency they are monitoring and you press the tune hot key it is supposed to tune to that frequency on your listening band. I

Hi. New to the group here. I have a D700 that I'm not ultra familiar with, but I can use it. My issue is that I'm set to beacon every 30 minutes and have digipeater turned on. I had this on about a ye

What's the current thinking on a replacement cooling fan for the D700? Mine is getting rather noisy like they do, and I guess I am lucky it has taken all this time to get to this point, despite a lot

For affected US users: Don't forget to update the Time Zone offset (from GMT) of your radio when changing your clocks. For the TM-D700 It's menu 1-6-5 (RADIO-TNC-TIME ZONE) For the TM-D710 it's menu 9

may have solved it the cable which came from the Kenwood people had been unplugged .... and the cable with the RT Systems company, USB-K5G Radio Cable, connected. I swapped them in order to see if it

Well, I "done" it again. Somehow NOW when I press a Tx button using UISS through Packet Engine Pro, I no longer get the radio to xmit. Basically, I see two settings External TNC band and Internal TNC

Mainly this is to be dedicated to APRS, Packet As such, I seem to be decoding APRS off 144.390; a List is enlarging ... I also can get on the "B" band on 144.34/94 and make myself known. I can use the

I'm looking for a recommendation of a GPS (no display) that I can use with my Kenwood TMD700A, something similar to but NOT the Radio Shack DigiTraveler GPS of days gone by. Thoughts?

Hello, I am a relatively new TM-D710GA owner. I haven't been using the 5 PM slots, but with some of the APRS work I'm looking to do, I think I've hit the point where I need to start using them. Is the

I have used an AVMap 6 connected to my Kenwood TH-D710 in the car for APRS for years but today the screen of the AVMAP 6 no longer responds to touch, and therefore I cannot after turning it on get to

I have trouble changing the D700 A side from VHF to UHF. I followed the book and was able to change the VFO to but it went to the 220 MHz band. Now I cannot get it back. Is there something I am missin

Very nice unit, was mobile inside my Dodge Magnum until I sold(2 years ago) the car, non=smoker, clean radio works well. Used it for primarily the APRS feature $250.00 plus shipping. Will ship in the

Now that I got my radio back from Kenwood, repaired, I'm trying to set up the aprs on it. I set up the A band as the data band, which was the default, and I inserted my call sign where it said no call

I was trying to figure out how to mount the control head / panel for my TM-D710GA or TM-D700 radios in a mobile situation where a permanent mount was not optimal. Due to theft precautions, I wasn't wi

Looking back through Messages I can see that a number of people have enquired over some years about the availability of a keyboard to use with the 710, and have always been advised that this third-par

The GPS navigation message contains date and time information in the form of a sequential week and seconds counter, which first started on 6th January 1980. As the week counter rolls over every 1024 w

TMD-700A (G) fair mobile condition, mount, mic, power cord, key board, key-board-to-radio converter, used mainly on APRS, $300 for all plus shipping of your choice! Photos available