If you are receiving this, you are now subscribed to the new site. Look around and please report any issues you might have. I will be setting the Yahoo group to read-only sometime next week so please

Hello All, Over the last year, I have found that working in a Yahoo account has become more and more difficult. With that said, I have also found that my other accounts, with other email providers are

Hello all, Based on the slow downfall of reliability of Yahoo Groups, it is time we make the move to Groups.io. Several other ham radio groups to which I belong have already made the switch. I suspect

I was curious and checked out first message was back in December of 1999. I started this group way back then I think not too long after I got my original D700A (which BTW is still operating at a frien

I see the CAL command is available in the TNC, but how does one use it? What commands are available for adjusting the LO (1200 Hz) and HI (2200 Hz) packet tones? Any help or directions will be appreci

Sent from my Verizon 4G LTE smartphone

Hi, Can any one advise why there are no files in the file section? Are they available any where else.? 73 ed vk3gd

Gents, My D710 has failed to open the TNC upon power up and gives me a TNC ERROR message. I can't use APRS or PACKET again. It was working last week. This is the third time in about 18 months of owner

Hi all of you, I am trying to get the rig to work with UISS I have it connected via the 2 cables for the raido but when in the program i hit TX it will not key up the raido, i am hearing fine. when I

Yes, have used usb to db9 adapters with the TMD-700AG and it works just fine. You should be able to find most any cable / adapter you want here: https://www.amazon.com/dp/B01DYNNUS8?ref_=ams_ad_dp_asi

I'm wondering if anyone on the group might have a suggestion. I'm using a Motorola amplified speaker that runs on 12 volts (for a MTS2000 convertacom) to get more volume out of my TMD700A. It works gr

Here is how I do SkyCommand, APRS and Digital modes from my Mobile & Handy Talkie. It sounds more difficult than it actually is. Install and configure one portion of the system at a time. Test it, and

Could the group recommend any links for software for the TM700A? I was specifically looking for programming software to set up the database of local repeaters and for firmware upgrades. I did some onl

Has anyone been able to use the TM-D700 for Falconsat-3? I just can't get it going. Any help would be appreciated. 73, Rick VK6RK

The following TMD700A poll is now closed. Here are the final results Would you still use this group if we switched it from Yahoo to a Google group? Created by: thomasmschaefer Yes, I would.55.56%(20)

Kenwood TM-D700a Radio, works fine. Includes long telephone cable for the control head. $300 cash gets it. Buyer pays shipping to ConUS. Email to KE5UBF at gmail dot com Also, I have a Yaesu ft-7900 w

Enter your vote today! A new poll has been created for the TMD700A group: Would you still use this group if we switched it from Yahoo to a Google group? Created by: thomasmschaefer Yes, I would. No, I

Trying to get full duplex TNC functionality for use with FalconSat-3. Manual says the TNC command is "FULLDUP". So, I connect via rs232 terminal emulator (cable connected to the control head, NOT the

Ladies and Gents, I would like to extend my use of Winlink from strictly HF/Winmor using an FT-857 to VHF using the D710G's built-in TNC. Would anyone like to point me to a configuration table, drawin

As a new member and a new comer to the D710G, I have a question re. how to save an APRS configuration to PM. My default configuration is created for a "fixed" location. However, I would like to also s