Hi, Can any one advise why there are no files in the file section? Are they available any where else.? 73 ed vk3gd

Gents, My D710 has failed to open the TNC upon power up and gives me a TNC ERROR message. I can't use APRS or PACKET again. It was working last week. This is the third time in about 18 months of owner

Hi all of you, I am trying to get the rig to work with UISS I have it connected via the 2 cables for the raido but when in the program i hit TX it will not key up the raido, i am hearing fine. when I

Yes, have used usb to db9 adapters with the TMD-700AG and it works just fine. You should be able to find most any cable / adapter you want here: https://www.amazon.com/dp/B01DYNNUS8?ref_=ams_ad_dp_asi

I'm wondering if anyone on the group might have a suggestion. I'm using a Motorola amplified speaker that runs on 12 volts (for a MTS2000 convertacom) to get more volume out of my TMD700A. It works gr

Here is how I do SkyCommand, APRS and Digital modes from my Mobile & Handy Talkie. It sounds more difficult than it actually is. Install and configure one portion of the system at a time. Test it, and

Could the group recommend any links for software for the TM700A? I was specifically looking for programming software to set up the database of local repeaters and for firmware upgrades. I did some onl

Has anyone been able to use the TM-D700 for Falconsat-3? I just can't get it going. Any help would be appreciated. 73, Rick VK6RK

The following TMD700A poll is now closed. Here are the final results Would you still use this group if we switched it from Yahoo to a Google group? Created by: thomasmschaefer Yes, I would.55.56%(20)

Kenwood TM-D700a Radio, works fine. Includes long telephone cable for the control head. $300 cash gets it. Buyer pays shipping to ConUS. Email to KE5UBF at gmail dot com Also, I have a Yaesu ft-7900 w

Enter your vote today! A new poll has been created for the TMD700A group: Would you still use this group if we switched it from Yahoo to a Google group? Created by: thomasmschaefer Yes, I would. No, I

Trying to get full duplex TNC functionality for use with FalconSat-3. Manual says the TNC command is "FULLDUP". So, I connect via rs232 terminal emulator (cable connected to the control head, NOT the

Ladies and Gents, I would like to extend my use of Winlink from strictly HF/Winmor using an FT-857 to VHF using the D710G's built-in TNC. Would anyone like to point me to a configuration table, drawin

As a new member and a new comer to the D710G, I have a question re. how to save an APRS configuration to PM. My default configuration is created for a "fixed" location. However, I would like to also s

Hi All, Has anyone changed the fan in their TM-D700? Will a standard 40x40x10 work or is there anything special about the Kenwood fan? Thank you!!! 73! -Dave

Hello to the group, I need help on programming my radio for a repeater so that it has a DCS tone only transmitting and no DCS code on receive. 145.470 -600 with a DCS tone of N047 on transmission only

One Important question please,,,, This is my first Kenwood experience. I replaced my Yaesu 8900 duel band in my 2016 Dodge Ram. Heres my issue, every time I transmit on 147.285 it breaks squelch or in

Merry Christmas and Holiday Greeting everyone. I have recently gotten back to APRS with my D710 and no longer have individual position reports showing on the screen after the arrival of a packet, like

http://houstonknanayacatholics.com/rnwbton.php _but in this world nothing can _be said to _be certain, except death and taxes. Deemer Sinks

Has anyone figured out the protocol between the radio and the head? My idea was to use a D700 body and plug in a custom interface that I could emulate the control head. I am aware I can control the ra