Topics

Can't seem to Digipeat any packets with my D710GA

KD7YZ Bob
 

I am also using APRSIS32. However quite a while back I asked this and never heard from anyone over there.

I have menu 616 Digipeat set "on"

so here is a snip from the Digipeat log of APRSIS32
----------------------------------------------------------------
WinMain:2019-11-26T13:10:46.172 Digipeating N4PWH-10 (WIDE1-1) via(WIDE1-1=WIDE1*)

WinMain:2019-11-26T13:10:46.172 Original(N4PWH-10>APDW15,WIDE1-1,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Transmit(N4PWH-10>APDW15,KD7YZ-15*,WIDE1*,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Packet:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
----------------------------------------------------------------------

and a hundred more just like this set.


It sez it did then sez it can't

is there some Uber-Data list where I can search and see if my D710GA actually did DigiPeat anything, ever ?

I am in a good position to capture signals up here on the Ridgeline so I though that I'd try being of assistance.


--
73
Bob KD7YZ
AMSAT LM #901


--
--
Bob KD7YZ
TM-D7100GA

Lynn Deffenbaugh
 

If you check the APRSISCE group, you should have received my response to your question about D710 in APRS mode not supporting digipeating from APRSIS32.  It's technically not possible in that radio mode because a program cannot transmit the "used" bit in the AX.25 header which is required for a digipeated packet.

Also, menu 616 in the radio governs what the RADIO will do, not what connected programs might try to do. APRSIS32 will have no logs of whether or not the radio digipeats a packet.

Besides, I thought you had a D710, not a D700?  If so, you're asking in the worng (sic) support group.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 11/27/2019 7:26 AM, KD7YZ Bob wrote:
I am also using APRSIS32. However quite a while back I asked this and never heard from anyone over there.

I have menu 616 Digipeat set "on"

so here is a snip from the Digipeat log of APRSIS32
----------------------------------------------------------------
WinMain:2019-11-26T13:10:46.172 Digipeating N4PWH-10 (WIDE1-1) via(WIDE1-1=WIDE1*)

WinMain:2019-11-26T13:10:46.172 Original(N4PWH-10>APDW15,WIDE1-1,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Transmit(N4PWH-10>APDW15,KD7YZ-15*,WIDE1*,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Packet:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
----------------------------------------------------------------------

and a hundred more just like this set.


It sez it did then sez it can't

is there some Uber-Data list where I can search and see if my D710GA actually did DigiPeat anything, ever ?

I am in a good position to capture signals up here on the Ridgeline so I though that I'd try being of assistance.


--
73
Bob KD7YZ
AMSAT LM #901

KD7YZ Bob
 

Yikes, Lynn ... it seems that this entire Email-List-Interface "mostly" doesn't send all emails to me. And I see nothing in "Junk/Spam"

Yes, I have a D710GA ... didn't find, on my initial look, a group just for the D710 ... thanks again .... and, "Yes", B4 u ask, I am on the web-interface, reading this ... for the dang first time.

--
--
Bob KD7YZ
TM-D7100GA