Copy PM to PM
I am a relatively new TM-D710GA owner. I haven't been using the 5 PM slots, but with some of the APRS work I'm looking to do, I think I've hit the point where I need to start using them.
Is there a way to copy the settings from the default PM to the other PM slots so I only have to change the one or two settings I'm interested in? Or do I have to manually configure each setting to match up?
I have both the standard MCP-6A software and the RT Systems software if that changes the answer. :-)
Jeff:toggle quoted messageShow quoted text
Just make the changes and save it in another PM slot.
On 7/29/19 7:33 PM, JeffH wrote:
----- Walt Jamison, W7PRB firstname.lastname@example.org-----
You simply use your current settings (say PM1 for example), make whatever changes you want, and then save it to whatever PM you wish (say PM5)
I have several presets; 1: normal APRS/Voice ops, 2: Voice only
ops, 3: external PC APRS ops, 4: As needed for temporary
operations (such as a Public Service event) APRS/Voice, and 5:
Parked (APRS beacon every 20 minutes, voice (band B) off,
backlight Off, beeps Off).
When setting up for a Public Service Event I save my PM1 to PM4, then make changes (voice frequency, APRS comment/status text etc) and then save again to PM4.
Hope this helps.
On 7/29/2019 22:33, JeffH wrote: