D710 Inhibit APRS beacon


Randy Allen
 

OK, my apologies. I was in a hurry to get the info out and wanted to make sure I was responding to the right question.

73

Randy

On 5/15/2015 21:14, 'S. Peterson' kg6jev@cox.net [TMD700A] wrote:
As the group co-owner, I can confirm the group is for both radios.

73,

Steven KG6JEV

-----Original Message-----
From: TMD700A@yahoogroups.com [mailto:TMD700A@yahoogroups.com]
Sent: Friday, May 15, 2015 9:07 PM
To: TMD700A@yahoogroups.com
Subject: Re: [TMD700A] D710 Inhibit APRS beacon

Thanks for your help...

And last time I checked this group was for BOTH the d700 and D710. At
least that is what it shows on the group home page.

--
Randy Allen, KAØAZS


Steven Peterson
 

As the group co-owner, I can confirm the group is for both radios.


73,

Steven KG6JEV

-----Original Message-----
From: TMD700A@yahoogroups.com [mailto:TMD700A@yahoogroups.com]
Sent: Friday, May 15, 2015 9:07 PM
To: TMD700A@yahoogroups.com
Subject: Re: [TMD700A] D710 Inhibit APRS beacon

Thanks for your help...

And last time I checked this group was for BOTH the d700 and D710. At least that is what it shows on the group home page.


lciotti@...
 

Thanks for your help...

And last time I checked this group was for BOTH the d700 and D710. At least that is what it shows on the group home page.


Randy Allen
 

Are you talking D710 (per the subject line) or D700 (this being a D700 group)?

For the D710:
Menu 601, set DCD Sense to "D or RxD Band".

Using the MCP-2A software, look under <Menu>, <APRS/NAVITRA>, <Internal TNC>, <DCD Sense>, "D or RxD Band"

For the D700:
Menu 1-6-2, <TNC>,<DCD Sense>, "A and B Bands"

Using the MCP-D700 software: <Radio Menu 2>, <DCD sense>, "A"and "B" bands

Hope this helps

73

Randy KAØAZS

On 5/15/2015 10:03, lciotti@lrlc.us [TMD700A] wrote:
Is there a setting to inhibit the APRS beacon when the second receiver
is receiving a station. It is kind of annoying to have a conversation
when the beacon goes off and the other receiver blanks out.


------------------------------------------------------------------------
Posted by: lciotti@lrlc.us


lciotti@...
 

Is there a setting to inhibit the APRS beacon when the second receiver is receiving a station.  It is kind of annoying to have a conversation when the beacon goes off and the other receiver blanks out.