I have the 55 page TM-D700A Specialized that I downloaded. You should be able to find all the manuals online.

#'s

I think the speech is in the main unit, not the head. You say cracked circuit board - could it be the control? IIRC both volume/squelch controls on the D700 head are easy plug-in replacements. I have

Leo was the go to guy when I had problems with a Kenwood. This info is old in my address book - worth an email or call to Kenwood: Leo Fahmie Kenwood Kenwood Tech Support kcc-amateur@... 310 7

IIRC this could be a common filter problem that is covered by warranty. Don't retire the rig before checking with Kenwood! TM-D710A: S/N 903XXXXX ~ 003XXXXX de Charlie, N5EXY, Grid EM1Øfl36vu, South S

Have you checked the users manual, p65? Also, be wary of polarized sunglasses - - - de Charlie, N5EXY, Grid EM10fl, South Suburban Greater Hutto I'm lost - where am I? http://www.aprs.fi/n5exy-9

I agree with the Nuvi350 and the Argent cable. Any unit that "talks NMEA" will work - I started out with a Garmin eTrek. The Nuvi350 is available on eBay, etc., as well as lifetime maps. Garmin hesita

1) A reset depends on you - did the previous owner have some repeaters in memory that you might want? 2) Cables other than power are not the same. You can make them up. Check the files in this group.

I get the same error for my D700 but the Keyspan adaptor works fine with my D7Ag.

Easily make your own, or, : http://www.ebay.com/itm/181244326850?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Have one to sell? Sell it yourself Separation Kit for Kenwood TM-D700A TM-V708A TM-D

I have used "Link700" as well as the Kenwood MCP with XP. Link700 can also program your D7 ht and possibly other radios also. IIRC there is a free trial version that is almost fully functional - excep

FWIW I bought a NUVI350 via ebay and Garmin would not register it to me or update the maps until they were satisfied that it was not stolen. They work very well with the Argent cable (I have two of th

I made up a "straight through" from regular phone wire with a 6pin on one end and 4pin on the other. Works fine. de Charlie, N5EXY, South Suburban Greater Hutto

I got good service more than once from Kenwood East http://www.avsl.net/ de Charlie, N5EXY, South Suburban Greater Hutto

I sent mine to Kenwood East within the last year and was pleased de Charlie, N5EXY, EM10fl, South Suburban Greater Hutto

I should proofread my copy. They shipped it back on Aug 20, not 12! For information to this group and others: My TM-D700 abruptly stopped communicating on the serial port. I had never heard of this be

For information to this group and others: My TM-D700 abruptly stopped communicating on the serial port. I had never heard of this before. I shipped the rig to Kenwood East, they received it on Aug 11

I sent my D700 to Kenwood East recently because it would not talk to a real serial port. It has been shipped back, expected tomorrow, cost about $85 including return shipping, turnaround 12 days after

I'll try to remember to report - at this point I expect I will ship this one to Kenwood East after this weekend. I got good service on my D7 ht that was returned today.

One last update on this. I am suspecting the gender changer or something internal to the radio. I used the computer to re-program my TH-D7 (fresh back from Kenwood East today) so the (real) serial por

Getting too late to continue. I'll try tomorrow and we probably should go off list.