|
s-meter reading?
I found this interesting, when I set up all my radios, I have always used 50mv signal to set the S-meter to S9, but that is for an SSB or CW radio! While an S-meter is not important on FM because we u
I found this interesting, when I set up all my radios, I have always used 50mv signal to set the S-meter to S9, but that is for an SSB or CW radio! While an S-meter is not important on FM because we u
|
By
Ron Pariseau
· #13756
·
|
|
D700 Cooling fan always runs
Next time fan gets noisy, peel the sticker off, drill a tiny hole if one is not already there, add 1 drop of 3n1 oil, all fixed! Replace sticker or add a day of silicon bathroom chalk
Next time fan gets noisy, peel the sticker off, drill a tiny hole if one is not already there, add 1 drop of 3n1 oil, all fixed! Replace sticker or add a day of silicon bathroom chalk
|
By
Ron Pariseau
· #13749
·
|
|
FS TM-D700A
If it works as good as it looks I'll take it Ron K1VSC
If it works as good as it looks I'll take it Ron K1VSC
|
By
Ron Pariseau
· #13730
·
|
|
FS TM-D700A
I have a friend with no money, Chrustmas present de K1VSC
I have a friend with no money, Chrustmas present de K1VSC
|
By
Ron Pariseau
· #13729
·
|
|
FS TM-D700A
PAY PAL?
By
Ron Pariseau
· #13728
·
|
|
D700a Internal Permanent Lat and Long
Hello yes if using the internal TNC and no GPS, you must set your lat/long manually in the menu! It should be under the APRS menu, I do not have the radio in front of me so I cannot direct you to the
Hello yes if using the internal TNC and no GPS, you must set your lat/long manually in the menu! It should be under the APRS menu, I do not have the radio in front of me so I cannot direct you to the
|
By
Ron Pariseau
· #13698
·
|
|
D00GA GPS Location not correct on beacon sending
Hi Bob, my GARMIN GPS478C, GARMIN 276C, MAGELLAN SPORTPRO and GARMIN RHINO are all set the WAAS and accuracy set to less than 100 feet! I will try to send you a screen shot if you think that will help
Hi Bob, my GARMIN GPS478C, GARMIN 276C, MAGELLAN SPORTPRO and GARMIN RHINO are all set the WAAS and accuracy set to less than 100 feet! I will try to send you a screen shot if you think that will help
|
By
Ron Pariseau
· #13694
·
|
|
D00GA GPS Location not correct on beacon sending
I had a similar issue with my D700, A friend called me and asked M e why I was in the middle of the Indian Ocean? Seems as though I had the W longitude set to E!
I had a similar issue with my D700, A friend called me and asked M e why I was in the middle of the Indian Ocean? Seems as though I had the W longitude set to E!
|
By
Ron Pariseau
· #13692
·
|
|
TM-700 shows busy one side A (left display)
Before you start any surgical activities, please make absolutely sure that all your settings are correct! Been there! Good luck
Before you start any surgical activities, please make absolutely sure that all your settings are correct! Been there! Good luck
|
By
Ron Pariseau
· #13664
·
|
|
TM-D700 fire up issue
Sorry to hear you still have the problem! I'll do some more thinking about this!
Sorry to hear you still have the problem! I'll do some more thinking about this!
|
By
Ron Pariseau
· #13659
·
|
|
D700A reversing the out of band mod
Yes sorry misunderstood, yes it is easy to do. Good eyes or strong glasses needed in my case! When I moded my 3, I just lifted one end of the SM resister and cut the green wire in the middle so I coul
Yes sorry misunderstood, yes it is easy to do. Good eyes or strong glasses needed in my case! When I moded my 3, I just lifted one end of the SM resister and cut the green wire in the middle so I coul
|
By
Ron Pariseau
· #13642
·
|
|
D700A reversing the out of band mod
Yes all 3 of 700's, they work perfectly. Suggestion, unsoldier and gently lift only one end of the resistor. That way you can restore it if you want!
Yes all 3 of 700's, they work perfectly. Suggestion, unsoldier and gently lift only one end of the resistor. That way you can restore it if you want!
|
By
Ron Pariseau
· #13638
·
|
|
Prog 115200
Disconnect cables from body and head, clean connection with lens wipes nothing stronger, possible dirt/corrosion
Disconnect cables from body and head, clean connection with lens wipes nothing stronger, possible dirt/corrosion
|
By
Ron Pariseau
· #13624
·
|
|
TM-D700 fire up issue
I neveruse thepowersupply to power on/offense radio, many because of power supplyspikesat startup. That can damage a radio. Use radio power on button, that's what it's for! Just my$0.02
I neveruse thepowersupply to power on/offense radio, many because of power supplyspikesat startup. That can damage a radio. Use radio power on button, that's what it's for! Just my$0.02
|
By
Ron Pariseau
· #13605
·
|
|
Wanted D-700A Control Head
RC-350 sent in error it is RC-2000 sorry Sent from Mail for Windows 10
RC-350 sent in error it is RC-2000 sorry Sent from Mail for Windows 10
|
By
Ron Pariseau
· #13603
·
|
|
Wanted D-700A Control Head
RC-350 (?) Control head from Kenwood is compatible, it's the control head for the B2000
RC-350 (?) Control head from Kenwood is compatible, it's the control head for the B2000
|
By
Ron Pariseau
· #13600
·
|
|
Wanted D-700A Control Head
OOPS KENWOOD REMOTE CONTROL HEAD RC-2000
OOPS KENWOOD REMOTE CONTROL HEAD RC-2000
|
By
Ron Pariseau
· #13598
·
|
|
Cannot connect tmd700a with yaac
The problem isn't genuine Prolific Chip sets, it is the Chinese copy thst caused the problems, I have several of both and every Chinese k ock off fails! True Prolific Chip set software are upgradeable
The problem isn't genuine Prolific Chip sets, it is the Chinese copy thst caused the problems, I have several of both and every Chinese k ock off fails! True Prolific Chip set software are upgradeable
|
By
Ron Pariseau
· #13507
·
|
|
Cannot connect tmd700a with yaac
Silly I know but sometimes it happens, make sure your RS232 port is turned on and operating correctly in Windows Device Manager. Sent from Mail for Windows 10
Silly I know but sometimes it happens, make sure your RS232 port is turned on and operating correctly in Windows Device Manager. Sent from Mail for Windows 10
|
By
Ron Pariseau
· #13502
·
|
|
Cannot connect tmd700a with yaac
CHECK com port settings, baud rate etc, all must match (radio, yaac), make sure inter connecting cable is good, normally you need ground, xmit, rcve, but some require more, Sent from my Samsung Galaxy
CHECK com port settings, baud rate etc, all must match (radio, yaac), make sure inter connecting cable is good, normally you need ground, xmit, rcve, but some require more, Sent from my Samsung Galaxy
|
By
Ron Pariseau
· #13501
·
|