Date   
VS-3 and aprs

Steve Siesel <steve@...>
 

What do I have to set in the D700 to have the voice synthesizer read out the
callsigns and messages in the aprs mode?

It does speak the commands, but does not work with the aprs information.

- Steve

Re: Control Software

Sergio Gallego <eb4cpk@...>
 

I visit this site and found Md700100.exe file i download it and it�s working
fine. If you don�t could download it i send you by mail. Thank for your
interesting. 73�s form EB4CPK

Re: Control Software

Philip Yanov <phil@...>
 

The software MD700100.exe is usually available via the Kenwood ftp
site. (ftp.kenwood.net) The problem is that the site has been down
today. This is the first time I have ever seen it down, but it is a
bit frustrating.

If you are in a hurry, send me an email, and I will reply with the
file. It is just over 1MB in size, so it will take a little while to
download if you do not have high-speed internet access. -73 KG4FOZ

--- In TMD700A@..., eb4cpk@w... wrote:
Hello I´m searching for soft to controller the D700. Thank´s.

Cross-band audio

mark@...
 

There was a post earlier about someone getting muddy audio when using
cross-band repeat. I too am having this problem. Looks like a
design flaw.

-- has anyone found a solution or workaround for this problem?

Thanks for your help.

Mark

Re: Control Software

JERRY ROCHELLE <k5qm@...>
 

try kenwood.com, that's where i found software.
jerry k5qm

eb4cpk@... wrote:

Hello I�m searchig for soft to controler the D700. Thank�s.

Community email addresses:
Post message: TMD700A@...
Subscribe: TMD700A-subscribe@...
Unsubscribe: TMD700A-unsubscribe@...
List owner: TMD700A-owner@...

Shortcut URL to this page:
http://www.onelist.com/community/TMD700A

Control Software

eb4cpk@...
 

Hello I´m searchig for soft to controler the D700. Thank´s.

Re: Garmin Emap <> D700

Philip Yanov <phil@...>
 

You end up having to look at a couple of different pictures to be
sure, but yes you are correct. The tip of the 2.5 mm connector is pin
2, the middle sleeve is 3, and the last is pin 5.

--- In TMD700A@..., "Steve Siesel" <steve@k...> wrote:

Now, does the Data in on the D700 (Tip on the 2.5 mm connector)
go to pin 2 on the DB9?

Re: GPS & 700A

Philip Yanov <phil@...>
 

As you probably gathered from the replies, there is a good bit of
personal preference in your choice of GPS. I have dedicated a GPS
III+ to the use of my D700. An advantage of the III+ over the Steet
Pilot is that the GPS III+ accepts waypoint data from the D700. This
means that stations that you receive via APRS on the D700 are plotted
on the scrolling map display of the GPS III+. The beauty of this is
that you have a scrolling map of stations received without having to
have a computer with you as well. This feature does not work with
the Street Pilot and would be reason enough for me not to use the
Street Pilot for my D700. [KG4FOZ]


--- In TMD700A@..., "Howard Breitbart" <howitser@b...> wrote:
What GPS units have people found to work the best with the 700A?
With
those units, what features do they have? I'd like the positioning
info, but also like to use mapping features for navigation. I'm
looking at the GPS III Plus adn the Street Map units. If anyone
has
input, I'd appreciate it!

73,

Howard, N2JIH

Please change your bookmarks.

Keith Maton <keith@...>
 

People.

There are still quite a lot of users accessing the MB7UIV website through
either:

http://www.keith.btinternet.co.uk/gb7uiv
http://www.keith.btinternet.co.uk/mb7uiv
http://www.btinternet.com/~keith/gb7uiv
http://www.btinternet.com/~keith/mb7uiv

Although these links still do work, they will go in the next week or so, and
after that all you'll get is a 404 error. To access the MB7UIV web site
please use the direct URL of:

http://www.mb7uiv.co.uk

If you have favourites/bookmarks set to any of the first four, please change
them to read the last one.

I know I've posted this change of URL here before, but as there are still a
lot using the old one, I felt it prudent to repost again.

Thanks.

73

Keith
--
Keith Maton, G6NHU
feek@...
Visit http://www.mb7uiv.co.uk - Home of the first licenced APRS gateway in
the UK
- Careful with that Axe

Garming Emap <> D700

Steve Siesel <steve@...>
 

Greetings,

I am going to interface my Garmin Emap with the data cable
which has a DB9 pin female connector to my soon
to arrive D700 radio. After looking at the docs, I am a little
confused and looking for
help from others who may have done this.

Obviously the ground is common to both connectors.
From the outer sleeve of the
2.5 mm connector to pin 5 on a DB9 male.

Now, does the Data in on the D700 (Tip on the 2.5 mm connector)
go to pin 2 on the DB9?

and

the Data Out on the D700 ( Inner Sleeve) goto pin 3 on the DB9?

Or do I have this reversed.

Any help would be appreciated.

73
- Steve

Re: D700A & GPS III +

Wayne Joyner <joyner@...>
 

Plug and Play. Just go into the GPS and set the NEMA and baud and you're
having fun! Don't forget to turn on GPS in the Radio - :)

Wayne Joyner
Nebraska Scanner Pages - Omaha, NE
Web Site : http://www.wjoyner.com/scanner/SCANNER.htm
Email : neweb@...

-----Original Message-----
From: Howard Breitbart [mailto:howitser@...]
Sent: Wednesday, July 26, 2000 01:19 PM
To: TMD700A@...
Subject: [TMD700A] D700A & GPS III +

Just got a GPS III +, was wondering if the serial cable that came
with
it would work to hook it up to my 700, or if I need a different one.

Thanks!

73,

Howard, N2JIH




Community email addresses:
Post message: TMD700A@...
Subscribe: TMD700A-subscribe@...
Unsubscribe: TMD700A-unsubscribe@...
List owner: TMD700A-owner@...

Shortcut URL to this page:
http://www.onelist.com/community/TMD700A

Re: D700A & GPS III +

Stewart Lewis <lewis@...>
 

It will work just fine!

CUL....Stew
w0shl@...

D700A & GPS III +

Howard Breitbart <howitser@...>
 

Just got a GPS III +, was wondering if the serial cable that came
with
it would work to hook it up to my 700, or if I need a different one.

Thanks!

73,

Howard, N2JIH

Memory Scan

jlesage@...
 

Is there anyway to have a priority while in the memory scan?

73s
kb9tsg

Re: GPS & 700A

Jim Murray <james31@...>
 

I'm using the Rand McNally. $79.00@ best-buy and they printed a $20 rebate
at checkout. Works OK with my 700. I posted the interconnect a week or so
ago. So far it is working great and seems to be accurate.

Jim Murray KC5QWG

Re: GPS & 700A

Rick Giguere <rick@...>
 

I'm using my GPS III+ .... I love it.


...Rick

On Fri, 21 Jul 2000, Howard Breitbart wrote:

What GPS units have people found to work the best with the 700A?
With
those units, what features do they have? I'd like the positioning
info, but also like to use mapping features for navigation. I'm
looking at the GPS III Plus adn the Street Map units. If anyone has
input, I'd appreciate it!

73,

Howard, N2JIH


------------------------------------------------------------------------
Shoes? On the web?
Click Here!
http://click.egroups.com/1/7061/11/_/674382/_/964213371/
------------------------------------------------------------------------

Community email addresses:
Post message: TMD700A@...
Subscribe: TMD700A-subscribe@...
Unsubscribe: TMD700A-unsubscribe@...
List owner: TMD700A-owner@...

Shortcut URL to this page:
http://www.onelist.com/community/TMD700A

Re: GPS & 700A

N1FLO@...
 

I can not say that it is the best but the GPS III+ works for me. I also have
US roads and recreation, maps are good only drawback 1 to 3 counties at a
time. A GPS like the III+ gives you a lot more than just your position.

Hope this helps

73

John N1FLO
Attleboro MA

GPS & 700A

Howard Breitbart <howitser@...>
 

What GPS units have people found to work the best with the 700A?
With
those units, what features do they have? I'd like the positioning
info, but also like to use mapping features for navigation. I'm
looking at the GPS III Plus adn the Street Map units. If anyone has
input, I'd appreciate it!

73,

Howard, N2JIH

Re: GPS & 700A

nmhotair@...
 

The street pilot does not listen to the 700. The III+ does. Peter Naumburg
K5HAB

In a message dated 7/21/00 3:12:12 PM Mountain Daylight Time,
howitser@... writes:

<< What GPS units have people found to work the best with the 700A?
With
those units, what features do they have? I'd like the positioning
info, but also like to use mapping features for navigation. I'm
looking at the GPS III Plus adn the Street Map units. If anyone has
input, I'd appreciate it!

73,

Howard, N2JIH
>>

Re: APRS and the VS-3

Rick Giguere <rick@...>
 

I've never been able to get it to work with APRS at all, and some of the
things I think it should do for "voice" don't happen, either.

It just seems like a very, very buggy firmware implimentation.



... Rick / KB1CHV

On Fri, 21 Jul 2000, Todd Ellis wrote:

Even though I am telling the radio to use the voice chip for APRS ONLY, it
is not announcing incoming messages. I received a lot of nice assistance
from folks on htaprs, but most did not own a D700 and read my manual for me.
I know how it is supposed to work, why DOESN'T it work? Anyone have a clue?

Todd Ellis, N2XL
Raleigh, NC


------------------------------------------------------------------------
Missing old school friends? Find them here:
http://click.egroups.com/1/7079/11/_/674382/_/964190271/
------------------------------------------------------------------------

Community email addresses:
Post message: TMD700A@...
Subscribe: TMD700A-subscribe@...
Unsubscribe: TMD700A-unsubscribe@...
List owner: TMD700A-owner@...

Shortcut URL to this page:
http://www.onelist.com/community/TMD700A