Hello Jerry. Do you now how to modify the tm-d700 for crossband? cu Robert pd0pvl -----Oorspronkelijk bericht----- Van: JERRY ROCHELLE [mailto:k5qm@...] Verzonden: dinsdag 16 mei 2000

hi all i d like to ask Q? what abut dx cluster monitoring can you see it in all the lcd or just part from lcd????? ________________________________________________________________________ Get Your

SEE PAGE 82 INSTRUCTION MAN. HOPE THIS SOLVES THE PROBLEM. 73, JERRY K5QM Robert Voerman wrote:

mine one does the same. do you now how to eneble crossband in the 700? Cu Robert pd0pvl@... -----Oorspronkelijk bericht----- Van: Thomas Lindner [mailto:dl2rum@...] Verzonden: dinsdag 16

Hello, 1. With TNC in PKT Mode: When entering "RAMTEST" in the terminalprogramm I will get the message: ... ERROR ADDRESS 000def0f 128 KBytes OK Is this normal, or I have realy a

I have tried to use both my D7 and D700 in kiss mode. They both seem to receive OK but TX does not seem to work correctly.. I have tried both at 9600 and 1200. Is this a known

I ordered my 700 a couple of months ago and love it. It's easy to use, the display is large enough to see and the on screen menu is easy to use. The PM function is a great idea. It allows you to

Well let me qualify by saying up to this point I have been a vhf phone operator, therefore cannot comment on packet or aprs operations,at least not yet ;0) I purchased the radio to have 440

I'm considering purchasing a D700, and was wondering what the general consensus is of the radio. With both mobile and fixed station use, how does it fare? Thanks! 73, Howard N2JIH

What do you have the PACKET TX (menu 3-C) setting set to? There are three choices, Manual, PTT, and Auto. If you set it to Auto (and all of your other settings are correct), it should send out a

Ok one complaint. The squelch tail after receiving a transmission seems a bit long, at least longer than the Yeasu I am used to. Any way to shorten it. Adjusting the squelch does not seen to have any

Ok First, This is all new to me. So far I love my new radio. I can receive the APRS packets just fine, well everyone's except mine. That would lend me to believe that I am not "sending" them. I have

Has anyone tried the Rand McNally GPS units with this radio yet. I know the gps unit "requires" a serial port and ps2 mouse hook up to work. Just wondering if anyone has figured out (or has) the pin

Jim - The latest issue of QST (May 2000) has a fairly in-depth review of the TM-D700a. You might want to check it out.

Hi. I am new to the list and didn't see the following issues addressed in the archives. I am considering purchasing a TM-D700. Can anyone comment on how fast the scan speed is, how resistant to

I cannot get it to receive me in Aprs mode as a stand alone, but can hooked to the laptop in "pkt" mode. Any ideas here either? Thanks, Timothy McGowen Oceanside, CA

I am using a laptop computer (WinAprs) and GPS with my TM-D700A in TNCmode. I cannot get it to track me, or recognize my GPS any help on this would beappreciated. w4ksc@...

Hello, Who knows to activate crossband repeater in the E version? cu Robert http://members1.chello.nl/~r.voerman/

I’vefound that what band you have on the B side will determine what bands you canselect on the A side, if that’s any help. Try changing the B side to a different band, then set the A side to118.

Ihad something similar happen to me. Thetime that you see on your pos screen is the time being sent to the radio fromthe GPS. I forgot to use the menuto set the time properly, thinking that the