The D700 will only announce messages destined for you. And then it will announce the call of the sending station. --- (Random Quote) Concerto (n): a fight between a piano and a pianist.

Even though I am telling the radio to use the voice chip for APRS ONLY, it is not announcing incoming messages. I received a lot of nice assistance from folks on htaprs, but most did not own a D700

=================================================================== ==== Kenwood D700 APRS(tm) Speech Message Contest

Takea look at the ARRL website, you should be able to find some good informationthere. www.arrl.net. Also,the AMSAT-NA site has loads of good info on most of the birds, take a lookthere.

I am looking for information for the beginner on tx and aprs through Sats. Any suggestions on where to look? Need the very basic first steps. I am doing great on 2meter land base now want to

Look at the mods pages (or search), but I think it involves removing a resistor along with the wire. (I have not tested or seen it done, BTW). Aaron --- (Random Quote) A little leaven leaveneth

Hello is there anyone that can help me with information how to modified the TM-D700a for tx on the Australia CB Band (476 MHz),I know the green wire and resistor but that goes only to 470MHz cheers

I have noticed the same problem. I do not know a cure for it. Tom

Has anyone else noticed that their crossbanded audio from the d700 is all muffled? The audio at the 2m repeater you trying to work is as if you are talking with a sock in your mouth. I have tried

It's a very nice system of interchangable mounts and adaptors for mobile equipment of all kinds. Their web site is www.ram-mount.com. ....Rick

HRO carries them, along with a lot of the aeronautical supply companies. R.A.M.'s website is www.ram-mount.com. I *believe* the correct model is the RAM-B-111. (Sorry, can't find my paperwork on

More to the point, what is a RAM mount? Keith -- Keith Maton, G6NHU feek@... - Careful with that Axe

I'm using it with no problem. * Set the radio for TNC, not aprs. * Be careful of port speed - don't change the defaults on the radio. * I use the "Kenwood DC" selection from the TNC window without

Be sure the radio is set for TNC and not APRS, this had be going in circles for a couple of days. Jim Murray KC5QWG

Has anyone set up winaprs to work with the 700? If so, what are the settings? I can't seem to get it to communicate with my radio. Other packet programs & Kenwood's memory control program work

Where do you obtain the RAM mount? << I used the free RAM mount that Kenwood was giving out at Dayton. I've been very, very happy with it. >>

hi all i just Start a new Group for Amateur radio Antennas its abut all kind of Antennas and another group for Loging softwares so please join us

I used the free RAM mount that Kenwood was giving out at Dayton. I've been very, very happy with it. I only made one change .... instead of mounting the control head to the Kenwood-supplied bracket

I am looking for a method to mount my GPS & D700a control head unit. I have heard of the R.A.M. mount & want to get your opinion on it or is there another method that is better. I want to get them

Hello, I am sorry for cross-posting this question, but I would like to maximize the possibility of getting an answer. I have the Kenwood D700a & bought the necessary cables to attach my