Thanks. I will try it again... -Tim

I have tried it and it works fine. I used a straight through db9 to my ibm thinkpad I think you need to turn on local echo to see what you are typing if I remember. 9600 8N1 is right. Make sure

Has anyone actually tried this? I tried it lunch time with my palmtop set to 9600 N-8-1 and couldn't get anything to happen. Anyone have any pointers? -Tim PS: I tried a null and straight

This sound like a good way to go. I already have a palmtop HP200lx.... I will give it a try,

Another method is to use a serial terminal on the db9 port. When in aprs mode on the d700, type on your terminal AMSG 00,K0STL-1,HELLO FROM D700 check this link for all the

Hello i have a palmtop, a HP 95 LX, and ithave a serial port (RS232), i want know if i could send and receive APRSmessages without a map, but with the gps. Thank´s for yourinterest.

You can use the microphone keypad to enter your messages. Time-consuming but works ... and faster than twiddling the dial. ...Rick

Well if you get this working, it would be interesting to look at. in the board and the DB-9 the important used the necessary you current than unit will love). I touch couple... that

Where would it plug in on the radio? ....the DB9 connector? Any chance of using a smaller keyboard that can be left or mounted in the vehicle? -Tim a

It goes in the mic line, so you plug the mic into one side of the board and a cable from the board to the radio in the other. You could use the DB-9 connector for message entry, but if you do that,

Will that be the DTMF mic that's not supplied with the 700E version, and not available in the UK? 73 Keith -- Keith Maton, G6NHU feek@... Get paid to surf the net - I do!

That is very good news indeed. I will be extremely interested in that one. 73 Keith -- Keith Maton, G6NHU feek@... Get paid to surf the net - I do!

It's in the works. I hope to have a prototype done this week. I'm using a standard PC keyboard for the project. John W2FS

There is an experimental service available: Someone can send email to aprsemail@... Put the callsign +SSID, if any, into the subjectline (i.e. KF6SWI-7) Then, either continue the message in

I am new to APRS and the TMD700A as well. In fact I just finished installing the radio in my truck yesterday. I have two questions. 1. Is there some kind of keyboard option for entering messages?

As far as I can tell, this can't be done. Each VFO will scan the stored memeories. However since each VFO is confiured only for certain Freq reception, it will only scan those memeories that it

Is this what your looking for? http://dorm.rutgers.edu/~ksproul/D700Voice.html -Tim

Anybody have the url for the winaprs/voice/commands for the d700? Thanks Will Owens N3ZLL

I'd be interested in the answer to that question as well. When I play with mine. I have the same GREAT :( feature you have:) 73's Wayne Joyner K0BWJ - Omaha, NE