For Sale: Working Tested radios tested with a working control head. Can be operated with CAT control cable (not supplied) and software. 2 available: Kenwood TM-D700 Radio body (NO CONTROL HEAD) with

Anyone have an idea how to get the saved track logs and marked waypoints off a D710G? I have and RT cable that I use for the TNC and programming. Also, I use a Macbook. If there is a Linux

I had to replace the internal battery inside. It is like a thin cap standing on its end. It brought mine back to life except for the year won’t change. -- RickGenesis 1-29

OK, both the Garmin II and the III+ were receiving and positions reported were very close. The date on the III+ was WRONG though and so was the time! The last pic is a screen shot of my phone for

I have a Garmin II, just put batteries in it, now waiting. It will take long as it needs to download the current almanac first, before being able to calculate its position. Will do the same with my

my garmin II plus shows three or more sats but no lat long shows, any ideas... joe

A few years ago I had this exact problem. One day I turned on my D700 and got the Prog 115200 message on the display. I could not resolve it and sent the radio to the (now closed) authorized repair

A few weeks ago I replaced the 4 filters in my TM-D710A and all worked just fine until the other day. Now, when I turn on the radio I get the usual 2 beeps then another beep, which I had never heard

Disconnect cables from body and head, clean connection with lens wipes nothing stronger, possible dirt/corrosion

Hello, I have a kenwood tm-v700, one afternoon, I turned it off working perfectly, but in the morning of the next day, I could not turn it on, after several attempts, it worked with the following

I just got a Kenwood D710a that had firmware 2.10 installed, figured I would go ahead and update it since the MCP software was complaining. Firmware updated fine, did a full reset, but when i try to

The suggested path is not quite right. It would have to begin with the call of the digipeater, in your case N4SRN-1. I think that would work for your D74, but would also digipeat any non-specific

Digipeat only "me" as entered in the MY CALLSIGN item, rather than anyone who hits my D710G. I learned elsewhere that the D710G defaults to UIFLOOD TEMPn-N so that aspect appears already addressed.

What do you mean by digipeat your callsign only? You don't want it to digipeat your position? Or rather, you don't want it to digipeat others' callsigns and positions?

Joshua, I agree it's a shame that APRS messaging isn't more widely used. I suppose it the chicken and the egg problem since most APRS radios are a nightmare to try and message through. Perhaps the

Thanks, David. APRS on the TM-V71A was my first intro to FM Packet. I didn't want to buy a Mobilinkd so I built one. I didn't want to buy a cable, so I built one. The bonus is, the DIN cable I

Hi Joshua, I didn't follow this real close but when I saw you mention the TMV71 it make me take note. I too had some surprises when trying to connect to the TNC in my 710. I have since put the 710

The reason I fell into Simple KISS from BPQ is that it made sense to me but I'm new to this so that doesn't mean much. I want to create connected mode sessions to interact with BBS's, Winlink, chat,

Hello Joshua, I could go on and one here about the issues with many of these cheap chinese radios be it their slow and/or inconsistent key up times (requires a high TXDELAY), their

One was a Baofeng, one was a Retevis. I'm only a little surprised since I have a Baofeng setup as a bi-directional iGate and it functions perfectly in that role. I don't see a TNC firmware update