hello group about a week ago we talked about the mcp 110 software,well today i loaded it on my windows 10 machine,but cannot get the software to read from the radio. i am using a db9 serial cable to

Try CHIRP it's free and works very well, I believe the original Kenwood software is still available! Sent from Yahoo Mail on Android

Here is how I do SkyCommand, APRS and Digital modes from myMobile & Handy Talkie. It sounds more difficult than it actually is. Install and configure one portion of the systemat a time. Test it, and

I am running both the Chirp and the native Kenwood software MCP-4A and MCP-6A on a number of Windows 7, 10 and Server 2012 boxes without issue. Rick Rick Coles VA7RKC Cowichan Valley

Works fine. Have used it on a Win7x86 netbook, and a Win10 laptop with Win7 compatibility mode checked if memory serves me right. v/r, Eric de N2JHJ

thank you i have an adapter that works just asking how it would do with the 700a programming. Leonard

Yes, have used usb to db9 adapters with the TMD-700AG and it works just fine. You should be able to find most any cable / adapter you want

thank you for the help. i will have to try it again.has anyone tried using a usb to db 9 adapter with this software Leonard

Mine runs on Windows7 just fine. Haven't tried it on Windows10. Comparability mode? The software for my TH-D7A works just fine on Windows10, and that is basically the same thing. Steve KA9MOT

i like chirp also,but it will not let me enter and save pl tones on my 700a and the ken-wood programming software will not t run on windows 7 through 10.anyone have any ideas on how to make it run on

An interesting thing about CHIRP is it programs the radio real time. Something I initially found unsettling but I came to like. If I remember correctly, I quit using CHIRP because it wouldn't allow

You can also use chirp for programming. It is also free. -Jess K5LLI

The K9DCI D700 CAT Sheet Ver 2-I from the files section works great for programming. 73 Rick VK6RK

Frank, The memory program is still on the Kenwood Amateur Radio support site. Here's a direct link to the program.

Could the group recommend any links for software for the TM700A? I was specifically looking for programming software to set up the database of local repeaters and for firmware upgrades. I did

I'll give it a try, thanks.

The following TMD700A poll is now closed. Here are the final results Would you still use this group if we switched it from Yahoo to a Google group? Created by: thomasmschaefer

Well, it's a hack - but one way around the DCD is to tune the Rx "off frequency" for a split second. If you have yours set to Data Rx, it should effectively fool the TNC into thinking it's clear to

Kenwood TM-D700a Radio, works fine. Includes long telephone cable for the control head. $300 cash gets it. Buyer pays shipping to ConUS. Email to KE5UBF at gmail dot com Also, I have a Yaesu ft-7900

HI Roy, Yes, I posted the question at QRZ but no replies. The D700 menu structure and some functions are different to the D710 annd D72/4. I have tried, but getting nowhere really. It's setup as you