Also try Cables and Connectors Newington CT Do not have phone number, but they do have a web page, all kinds of great stuff, they are very knowledgeable, and customer oriented, ask for Armando Sent

Hi I am willing to purchase a dead D700A to use as parts. I am in need of a discontinued connector. Please reply offline to joe at laferla dot ca. Thanks. Joe VA3JLF Sent from Mail

HI Ron Thanks for this. I tried them and they tell me that the part is discontinued and unavailable. Joe VA3JLF Sent from Mail for Windows 10

Did you try EAST COAST Transistor Parts, Inc. 2 Marlborough Road West Hamostead, New York 11552 www.eastcoasttransistor.com I het a lit of parts from them Good luck Ron K1VSC Sent from my Samsung

Hi While I was servicing my venerable D700A, I inadvertently broke the ribbon cable connector on the main rxtx board which connects to the tnc board, I checked with pacparts.com and they do stock the

When I look on Findu, I see I haven't sent a GPS position in over a day. Yet I think I beacon several times an hour from the fixed location. I do have my precise position in the #605 memory position

Fldigi only works with a sound card, in the head is the TNC. Fldigi doesn't work with a TNC. I know in the settings there's a setting for KISS. I never got it to work. later Don Poaps New Westminster,

You mean like a signal link? That’s a real bummer if so, it works beautiful one time both ways lol

I re read your original message. That plug won't work. You need a Sound card with the 6 pin din plug into the data plug on body. Don Poaps New Westminster, BC VA7DGP DATA VA7QU VOICE Winlink:

What are you trying to do? Fldigi needs a soundcard. Any sound Card program should work. I've used MMSSTV, Winlink Express, UZ7HO and various programs that work with that program. 73 Don Poaps New

Chokes made no difference, I really think it is a setting in fldigi, but not sure which

I haven’t tried the chokes yet but just thinking, it is hooked up exactly the same way as using echolink with the radio and echolink works perfectly. If it was rf wouldn’t that effect both of them

I've used sound card on v71 and I've had similar issues before. These sound card were not Signalink 73 Don va7dgp -- Don VA7DGP/VA7QU

I will give that a try. Makes sense, The first thing I thought was that it seemed like some kind of safety shutting it off.

RF getting into the device. Add snap on chokes to the cables. 73 Don Poaps New Westminster, BC VA7DGP DATA VA7QU VOICE Winlink: va7qu@... Subject://wl2k

Trying to setup d710ga with fldigi. I am using the pg5h (I think that is the number) cable from kenwood was plugged into the rs232 of my computer and into the back of the radio not the back of the

Tony, I did the Full-Reset. Decoded no packets off ,CH-A, 144.390 overnight. However, I had CH-B on 145.825 for Sat's and did copy RS0ISS traffic. CH-B is the External and is read through SignaLink

Thanks Mark, Good info. The 700 info seems to be discussing mobile radios as digipeaters. While I'm trying to set up a mobile radio as a digi, it will be used as a local permanent digi on a hilltop

I figured the Full Reset out ...had to toggle Aux-999 enough to get "Full" Did that and now hoping I get some decodes. Have not imported my previous settings yet in case they were the

Packet Speed 9600bps should be 1200bps on 144.390 MHz 73 de Pat R. Patrick Ryan ARS: KC6VVT, Grid: EN51lf, email: kc6vvt@... Facebook for ham related: http://www.facebook.com/KC6VVT/info