I tried an FTM-400 and didn't love it so I sold it and got a 710G. The other truck has had a TM-V71A since I got my license but I purchased another FTM-400 thinking I'd give it another shot. Well, it

Outstanding, thanks for letting me know. 73 de Pat

I confirmed tonight that XFLOW OFF solved my issue. I also turned the mailbox on and have successfully written and read mail using a TNC2 as the other end.

Csmacg45@... From: TMD700A@groups.io <TMD700A@groups.io> on behalf of R. Patrick Ryan <kc6vvt@...> Sent: Saturday, December 4, 2021 9:48:39 AM To: TMD700A@groups.io <TMD700A@groups.io> Subject: Re:

Thank you, Pat. I was wondering if XFLOW would be the issue but just as stated on that site, it isn't intuitive. I thought about disconnecting my serial adapter then if that didn't work, toggle

This may help Kenwood D710 TNC cheat sheet - TrinityOS http://www.trinityos.com/HAM/CentosDigitalModes/misc/D710-TNC-setup.txt 73 de Pat R. Patrick Ryan ARS: KC6VVT, ASEC/IL, OES/IL, Grid: EN51lf,

Is it as simple as the following connections? Byonics GPS2 pin 1 - no connection Byonics GPS2 pin 2 - TRRS tip (to TM-D710A) Byonics GPS2 pin 3 - no connection Byonics GPS2 pin 4 - 5VDC source

Getting the correct voltage was an issue. I purchased a 12v to variable board for five bucks from china. Otherwise puck worked until tree crushed van. Joey VA3GOC

Has anyone run APRS using a Bionics GSP2 receiver with a TM-D710A mobile? I emailed Bionics to ask if this combination would work, but never got a reply. Thanks - ed, k9ew

On your soft keys, press POS. Now press the right arrow u til you come to the GPS screen with a compass rose on the left and bars on the majority of the screen. This is your signal screen. If you

Unfortunate circumstance. I have purchased a Davis wind vane/anemometer but don't want their electronics for the reason you found. I'll run my own collection and reporting microcontroller.

Okay, you packet junkies, I have a question about the internal TNC. It have an MFJ-1270B that I am using to connect to my 710G. On the 710G I have CONOK ON and BBS ON. I can connect to my 710G but

I, and others for me, solved the WxNow and Weather data issue. So now I was trying to figure out how strong or IF the D710G is receiving any GPS Sats. I "Think" I have the window open. Its got a

I note several stations on my APRSIS32 display who also have a blue Wx symbol. How to I get the info from the Davis VP2 Console to the Davis-APRS-Wx jack a 2.5mm 3-pin plug ??? My Davis already

Hello yes if using the internal TNC and no GPS, you must set your lat/long manually in the menu! It should be under the APRS menu, I do not have the radio in front of me so I cannot direct you to the

Are you saving it as a PM? If so make sure you've selected that PM as the active one. Virus-free. www.avast.com

I have a 700 and am using the internal TNC as a fill in digipeater for APRS. I've set the Lat and Long and settings that I think should allow it to display proper location, but it puts the radio at

Hello Ron Pariseau via groups.io: Sunday, November 21, 2021, 8:29:16 AM, you chiseled out: I've discovered that ONLY the MapView of program UISS shows me off in Latitude. Whereas wth my friend

Hi Bob, my GARMIN GPS478C, GARMIN 276C, MAGELLAN SPORTPRO and GARMIN RHINO are all set the WAAS and accuracy set to less than 100 feet! I will try to send you a screen shot if you think that will help

Hello Ron Pariseau via groups.io: Friday, November 19, 2021, 12:28:26 PM, you chiseled out: Ahhh, would that it was so simple. Hi Hi . Mine is showing up perfect Longitude but about 11 degrees