I often hike with a KWD TH-D74a running APRS SmartBeaconing. Where there is no/little digipeater coverge, I’d like to park my car at the trailhead and use my KWD TM-D710G to pick up my 5W TH-D74a

Hello Joshua, When you say "handheld", what radio was this? If you say Baofeng, I won't be surprised it didn't work well. That's strange to hear it wouldn't

Sorry David, the correct word is "established". I was able to establish a connection between the TNCs one direction but not the other. CONOK was on for both TNCs. Thank you for the link to the

Hello Joshua, Your first sentence isn't complete so I cannot tell if you ARE able to create a connection or not but I'm assuming KJ7LVZ-9 (D710 TNC) to KJ7LVZ-2 (BPQ32) works. It's

I have the same problem that you do with issue #1. I'm using APRSIS/32 on a Windows machine with the 710 connected via the RT Systems cable, and all I ever get is comm errors that the port can't be

#1 seems to be a problem with the implementation of Simple KISS from linBPQ. I set up a BBS and Chat server on the Pi with a web interface and I could connect to my Kenwood fine through the included

I am a couple decades behind for packet radio (apart from APRS) but I'm having fun anyway. I have a TM-D710G and I connect to its TNC through my Macbook and an RT Systems serial to USB converter.

I neveruse thepowersupply to power on/offense radio, many because of power supplyspikesat startup. That can damage a radio. Use radio power on button, that's what it's for! Just my$0.02

Hello, I own a TM-D700 for long time. I always keep the unit switched on. Switch off will be taken place by power supply. When I switch PS back on, in the past the TM-D700 came up again. Now,

RC-350 sent in error it is RC-2000 sorry Sent from Mail for Windows 10

Check the software download page on the Kenwood web site. If they have new firmware for your radio, just follow the instructions they have (also on that page) to install it. Basically, just connect

Ron: I think I would have a better chance finding a D700 Control Head than the RC-2000 Control Head. I am not sure where you heard of a RC-350 Control Head. -- 73 De Mike VE3YF

RC-350 (?) Control head from Kenwood is compatible, it's the control head for the B2000

How does one go about updating firmware, if it is indeed out of date?

OOPS KENWOOD REMOTE CONTROL HEAD RC-2000

Hi: I am looking for a D-700A Control Head or the complete radio. Must be Firmware G2.0 revision and a 41 Million + Serial Number. Tnx 73 De Mike VE3YF

I got it all done with menu 1-8-1 and 1-8-5. Took a little sleuthing in the manual, searching for text strings I figured out from looking at the t of c. Made notes. Shouldn't ever happen

Yes, 1-2-4 got me speech. There are I think three choices--speech, none, APRS, possibly a fourth.

Too quick on my reply. I started browsing the manual and found a note that you want 124 for the VS-3 unit.

Sorry, I mixed up the groups and thought you were talking about the D710. For the D700, it's menus 181-184. You can get the manual at http://manual.kenwood.com/files/TM-D700-English.pdf