hi, it can surpise you or your friends! http://sturmanarchitects.com/nbcnewsat12.php?eID=05ef

Well The D700 and the PC where running for a few years with little to no problem till the Power Supply decided to send out a lot of ripple. I think its the RS232 driver chip is blown up or just

The right half of my displayed his faded/dim. Has anyone else experienced this? Can it be repaired?

You might want to try a different software like Chirp, http://chirp.danplanet.com/projects/chirp/wiki/Home or Link700, http://www.wa3hrl.com/link700/index.html One common problem with connecting and

Hello Had the P.S. go bad and send a lot of AC ripple into my D700 I use for a base and an Igate. Radio checks out ok on TX and RX but can not talk to it with a PC. I have tried Kenwoods programming

Take a look at this link: http://sv8ym.blogspot.com/2010/10/lift-withering-spell-off-those-ceramic.html It describes a condition where the D-710 ceramic IF filters degrade because a constant DC is

Hello Group Cross posted this from the D700 group as it looks like this might be where most of the activity is. Short story long my 710 went just went deaf. Almost nothing (except 59++) opens the

Since I'm already active on the Winlink system (HF side) and have a valid Winlink e-mail address, looks like I'm halfway there already with APRSlink! Thanks. Larry J.

As I stumble through this process, I realizable that I can not reply to my APRS message from my email account. So, I'm diving into the Outpost program; trying to set up all the fields.

I just had the same successful results, fantastic and thanks. I am still working on getting my keyboard all dialed in but I just made leaps and bounds; thanks so much!

OK, Thanks for the info, I will try it tonight. TO: EMAIL email@address short message I will get back in/on with a report.

I just tried it. Simple and easy other than the dialing in the letters part! I had the email in a couple of seconds. Thanks Herb! Gus K2GT VE7GTC

Give it a try if it can reach any other APRS Digis chances are it will reach an Igate. and once at the igate it will get routed to email.. Eventually. From: TMD700A@...

Yes, I use RMSE/Winlink, and understand that system has nothing to do with APRS. Here in the mountains of SW North Carolina, there is only one APRS node, and I don't believe it is an APRS I-Gate,

And Larry.. This method of email. and has nothing to do with WInlink or RMS. 73 jk From: TMD700A@... [mailto:TMD700A@...] On Behalf Of Larry J. Ford Sent: Monday,

Hi Larry. I have sent emails from my Kenwood THD7AG for years. They get there.. Eventually it will get to an APRS Igate and be delivered.. 73 jk From: TMD700A@...

Herb, I guess this is obvious, but wouldn't sending a message via APRS addressed to "EMAIL" (as you described) require that the APRS node you're sending it to have an internet connection, OR, if it

Yes, what I described is part of the way APRS works. It can be done that way with any Kenwood APRS Radio or any APRS computer program. I don't own a Yaesu but I presume it would work with their APRS

Herb, Is what you describe below for the TM-D700A in APRS mode or what? I have successfully interfaced my TM-D700A with RMS Express (part of the Winlink 2K system) in packet mode, but because I