Date   

d-710 group scan/link

Pat Bryhan
 

Hello, I have an older d-710a that I recently acquired.  I am having trouble figuring out the group scan/ group link features.  The manuals are less helpful than I need.  Anyone have experience with these features?    73, KA9VRK


What "modem" program to use on D710GA to decode BricSat2 on 437.605 @ 9600b ?

NR4U Bob AFMARS
 

set Ch B to that QRG and 9600b but was running through AGWPE and figured that was wrong protocol.

Or I set the Rig up incorrectly.

I can ask over on AMSAT but thought there may be another D710 using for Sats, here.
--
--
Bob KD7YZ
TM-D7100GA


Re: Can't seem to Digipeat any packets with my D710GA

NR4U Bob AFMARS
 

Yikes, Lynn ... it seems that this entire Email-List-Interface "mostly" doesn't send all emails to me. And I see nothing in "Junk/Spam"

Yes, I have a D710GA ... didn't find, on my initial look, a group just for the D710 ... thanks again .... and, "Yes", B4 u ask, I am on the web-interface, reading this ... for the dang first time.

--
--
Bob KD7YZ
TM-D7100GA


Re: Can't seem to Digipeat any packets with my D710GA

Lynn Deffenbaugh
 

If you check the APRSISCE group, you should have received my response to your question about D710 in APRS mode not supporting digipeating from APRSIS32.  It's technically not possible in that radio mode because a program cannot transmit the "used" bit in the AX.25 header which is required for a digipeated packet.

Also, menu 616 in the radio governs what the RADIO will do, not what connected programs might try to do. APRSIS32 will have no logs of whether or not the radio digipeats a packet.

Besides, I thought you had a D710, not a D700?  If so, you're asking in the worng (sic) support group.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 11/27/2019 7:26 AM, KD7YZ Bob wrote:
I am also using APRSIS32. However quite a while back I asked this and never heard from anyone over there.

I have menu 616 Digipeat set "on"

so here is a snip from the Digipeat log of APRSIS32
----------------------------------------------------------------
WinMain:2019-11-26T13:10:46.172 Digipeating N4PWH-10 (WIDE1-1) via(WIDE1-1=WIDE1*)

WinMain:2019-11-26T13:10:46.172 Original(N4PWH-10>APDW15,WIDE1-1,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Transmit(N4PWH-10>APDW15,KD7YZ-15*,WIDE1*,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Packet:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
----------------------------------------------------------------------

and a hundred more just like this set.


It sez it did then sez it can't

is there some Uber-Data list where I can search and see if my D710GA actually did DigiPeat anything, ever ?

I am in a good position to capture signals up here on the Ridgeline so I though that I'd try being of assistance.


--
73
Bob KD7YZ
AMSAT LM #901


Can't seem to Digipeat any packets with my D710GA

NR4U Bob AFMARS
 

I am also using APRSIS32. However quite a while back I asked this and never heard from anyone over there.

I have menu 616 Digipeat set "on"

so here is a snip from the Digipeat log of APRSIS32
----------------------------------------------------------------
WinMain:2019-11-26T13:10:46.172 Digipeating N4PWH-10 (WIDE1-1) via(WIDE1-1=WIDE1*)

WinMain:2019-11-26T13:10:46.172 Original(N4PWH-10>APDW15,WIDE1-1,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Transmit(N4PWH-10>APDW15,KD7YZ-15*,WIDE1*,WIDE2-1:!3819.85NI08258.30W#RasPi I-Gate/Digipeater in Grayson KY)

WinMain:2019-11-26T13:10:46.172 Packet:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
----------------------------------------------------------------------

and a hundred more just like this set.


It sez it did then sez it can't

is there some Uber-Data list where I can search and see if my D710GA actually did DigiPeat anything, ever ?

I am in a good position to capture signals up here on the Ridgeline so I though that I'd try being of assistance.


--
73
Bob KD7YZ
AMSAT LM #901


--
--
Bob KD7YZ
TM-D7100GA


Re: APRS Auto Tune to listening frequency

Randy Allen
 

That feature came in with the TM-D710, the successor to the D-700.  The frequency part of the APRS spec was not developed until well after the D700 was released.

Sorry, but the TM-D700 is not designed to perform this particular function,

73

Randy KAØAZS

On 11/9/2019 13:30, Jonathan Panzica wrote:
The TM-D700 is supposed to have a feature where when someone enters the frequency they are monitoring and you press the tune hot key it is supposed to tune to that frequency on your listening band.  I have never gotten this to work though and wondering if anyone has had any luck with getting this feature to work.


APRS Auto Tune to listening frequency

jonathan.panzica@...
 

The TM-D700 is supposed to have a feature where when someone enters the frequency they are monitoring and you press the tune hot key it is supposed to tune to that frequency on your listening band.  I have never gotten this to work though and wondering if anyone has had any luck with getting this feature to work.


Re: D700 Not BCONing Correctly

Chad Stahlnecker <orderly25@...>
 

I checked, radio is still on, and the call there is K7JCN-9. I had my mobile on 9 also so changed that. I look on APRS.FI and I do see my raw packets there from today up to yesterday and the day before.


Re: D700 Not BCONing Correctly

Chad Stahlnecker <orderly25@...>
 

I'll check the radio when I get home. I left it on I'm pretty sure. I'll let y'all know 


Re: D700 Not BCONing Correctly

Eric
 

I see a -2, -3 and -9, but no -7

The HF gateway almost makes me jealous.. :-)  The local noise floor, even with the home power turned off, is so bad that HF is unusable.  On 160-10 meters, I can hear a ham about a mile away as long as he runs at least 150 watts.



Re: D700 Not BCONing Correctly

Chad Stahlnecker <orderly25@...>
 

Sorry k7jcn-7 is the one in question. 


Re: D700 Not BCONing Correctly

orderly25@...
 

It's still on. K7jcn-9. 


Re: D700 Not BCONing Correctly

Eric
 

I wasn't able to find any raw packets for K7JCN.  

According to aprs.fi and aprsdirect.com sites, raw packets are only stored for a day or two so I'm guessing your radio has been off for a couple of days.

Eric
WB6TIX


Re: D700 Not BCONing Correctly

orderly25@...
 

My call sign is K7JCN. I appreciate your checking!


Re: D700 Not BCONing Correctly

Randy Allen
 

Chad,

If you would post your callsign, I (and perhaps others on the group) could take a look at your area on APRS.FI or FIND-U to try to see what is going on.

73

Randy KAØAZS

On 11/6/2019 22:09, orderly25 via Groups.Io wrote:
Randy,
I made the changes to the radio as you suggested. It continues to send raw packets every 10 minutes. Although I am checking some of the others in my area they are beconing as much if not frequently more than I am. I'm not sure I should worry about it so much if that is the case?

Virus-free. www.avast.com


Re: Replacement fan suggestions

Doug Alderdice
 

Thank you for all the suggestions.

73,

Doug, KA2WFT

On 11/7/2019 4:55 AM, Lee Besing wrote:
https://www.pacparts.com/model.cfm?mfg=kenwood&model_id=TMD700A&action=list_part
For a list of all Kenwood TM-D700 parts from this vendor.
Lee Besing, N5NTG
210-771-7075 <tel:2107717075>
San Antonio TX
-----Original Message-----
From: Doug Alderdice <ka2wft@...>
To: TMD700A@groups.io
Sent: Wed, 06 Nov 2019 10:30 PM
Subject: Re: [TMD700A] Replacement fan suggestions
OK, thanks.  That was kind of my plan, to just look for the right size
12V fan, but thought I'd ask in case someone had found a particular unit
that they were satisfied with and would recommend.
73,
D.
On 11/6/2019 11:03 PM, Herb wrote:
> I have replaced the fan in several of my radios as the do fail in
time.  I have always used any 12v fan I could buy at a Hamfest that was the correct dimensions to fit the bracket.  Have had to splice the wires in the current connector to make them work but have always got them to work just fine.
>
> I am sure you can search the internet and find a fan that fits for a
few bucks....
>
>
> Herb, KB7UVC
> NW APRS Group, West Sound Coordinator
> Our WEB Site: http://blog.nwaprs.info/
>
>
>
> -----Original Message-----
> From: TMD700A@groups.io <mailto:TMD700A@groups.io>
[mailto:TMD700A@groups.io <mailto:TMD700A@groups.io>] On Behalf Of Doug Alderdice
> Sent: Wednesday, November 06, 2019 6:21 PM
> To: TMD700A@groups.io <mailto:TMD700A@groups.io>
> Subject: [TMD700A] Replacement fan suggestions
>
> What's the current thinking on a replacement cooling fan for the D700?
> Mine is getting rather noisy like they do, and I guess I am lucky it has
> taken all this time to get to this point, despite a lot of use and a lot
> of miles over the years.
>
> Are the fans still available from Kenwood, or, is there a better fan
> that you've found for this purpose?
>
> Tnx es 73,
>
> Doug, KA2WFT


Re: Replacement fan suggestions

Lee Besing
 

https://www.pacparts.com/model.cfm?mfg=kenwood&model_id=TMD700A&action=list_part

For a list of all Kenwood TM-D700 parts from this vendor.


Lee Besing, N5NTG
210-771-7075
San Antonio TX


-----Original Message-----
From: Doug Alderdice <ka2wft@...>
To: TMD700A@groups.io
Sent: Wed, 06 Nov 2019 10:30 PM
Subject: Re: [TMD700A] Replacement fan suggestions

OK, thanks.  That was kind of my plan, to just look for the right size
12V fan, but thought I'd ask in case someone had found a particular unit
that they were satisfied with and would recommend.

73,

D.


On 11/6/2019 11:03 PM, Herb wrote:
> I have replaced the fan in several of my radios as the do fail in time.  I have always used any 12v fan I could buy at a Hamfest that was the correct dimensions to fit the bracket.  Have had to splice the wires in the current connector to make them work but have always got them to work just fine.
>
> I am sure you can search the internet and find a fan that fits for a few bucks....
>
>
> Herb, KB7UVC
> NW APRS Group, West Sound Coordinator
> Our WEB Site:  http://blog.nwaprs.info/
>
>
>
> -----Original Message-----
> From: TMD700A@groups.io [mailto:TMD700A@groups.io] On Behalf Of Doug Alderdice
> Sent: Wednesday, November 06, 2019 6:21 PM
> To: TMD700A@groups.io
> Subject: [TMD700A] Replacement fan suggestions
>
> What's the current thinking on a replacement cooling fan for the D700?
> Mine is getting rather noisy like they do, and I guess I am lucky it has
> taken all this time to get to this point, despite a lot of use and a lot
> of miles over the years.
>
> Are the fans still available from Kenwood, or, is there a better fan
> that you've found for this purpose?
>
> Tnx es 73,
>
> Doug, KA2WFT





Re: Replacement fan suggestions

Lee Besing
 

Gigaparts.com had the right fan for my TM-D700A radio when the original fan got crushed while under the driver's seat, but they don't have any D700 parts listed today. 

Many other posts say to simply buy a 12v ball bearing fan of the right dimensions and change out the connector. They say it runs much quieter than the OEM fan.

But I found a vendor who still lists the OEM fan for $27.13 plus shipping (I presume)...


https://www.pacparts.com/part.cfm?sku=880W19%2D7088%2D92


Lee Besing, N5NTG
210-771-7075
San Antonio TX


-----Original Message-----
From: Doug Alderdice <ka2wft@...>
To: TMD700A@groups.io
Sent: Wed, 06 Nov 2019 10:30 PM
Subject: Re: [TMD700A] Replacement fan suggestions

OK, thanks.  That was kind of my plan, to just look for the right size
12V fan, but thought I'd ask in case someone had found a particular unit
that they were satisfied with and would recommend.

73,

D.


On 11/6/2019 11:03 PM, Herb wrote:
> I have replaced the fan in several of my radios as the do fail in time.  I have always used any 12v fan I could buy at a Hamfest that was the correct dimensions to fit the bracket.  Have had to splice the wires in the current connector to make them work but have always got them to work just fine.
>
> I am sure you can search the internet and find a fan that fits for a few bucks....
>
>
> Herb, KB7UVC
> NW APRS Group, West Sound Coordinator
> Our WEB Site:  http://blog.nwaprs.info/
>
>
>
> -----Original Message-----
> From: TMD700A@groups.io [mailto:TMD700A@groups.io] On Behalf Of Doug Alderdice
> Sent: Wednesday, November 06, 2019 6:21 PM
> To: TMD700A@groups.io
> Subject: [TMD700A] Replacement fan suggestions
>
> What's the current thinking on a replacement cooling fan for the D700?
> Mine is getting rather noisy like they do, and I guess I am lucky it has
> taken all this time to get to this point, despite a lot of use and a lot
> of miles over the years.
>
> Are the fans still available from Kenwood, or, is there a better fan
> that you've found for this purpose?
>
> Tnx es 73,
>
> Doug, KA2WFT





Re: Replacement fan suggestions

Doug Alderdice
 

OK, thanks. That was kind of my plan, to just look for the right size 12V fan, but thought I'd ask in case someone had found a particular unit that they were satisfied with and would recommend.

73,

D.

On 11/6/2019 11:03 PM, Herb wrote:
I have replaced the fan in several of my radios as the do fail in time. I have always used any 12v fan I could buy at a Hamfest that was the correct dimensions to fit the bracket. Have had to splice the wires in the current connector to make them work but have always got them to work just fine.
I am sure you can search the internet and find a fan that fits for a few bucks....
Herb, KB7UVC
NW APRS Group, West Sound Coordinator
Our WEB Site: http://blog.nwaprs.info/
-----Original Message-----
From: TMD700A@groups.io [mailto:TMD700A@groups.io] On Behalf Of Doug Alderdice
Sent: Wednesday, November 06, 2019 6:21 PM
To: TMD700A@groups.io
Subject: [TMD700A] Replacement fan suggestions
What's the current thinking on a replacement cooling fan for the D700?
Mine is getting rather noisy like they do, and I guess I am lucky it has
taken all this time to get to this point, despite a lot of use and a lot
of miles over the years.
Are the fans still available from Kenwood, or, is there a better fan
that you've found for this purpose?
Tnx es 73,
Doug, KA2WFT


Re: Replacement fan suggestions

Herb
 

I have replaced the fan in several of my radios as the do fail in time. I have always used any 12v fan I could buy at a Hamfest that was the correct dimensions to fit the bracket. Have had to splice the wires in the current connector to make them work but have always got them to work just fine.

I am sure you can search the internet and find a fan that fits for a few bucks....


Herb, KB7UVC
NW APRS Group, West Sound Coordinator
Our WEB Site: http://blog.nwaprs.info/

-----Original Message-----
From: TMD700A@groups.io [mailto:TMD700A@groups.io] On Behalf Of Doug Alderdice
Sent: Wednesday, November 06, 2019 6:21 PM
To: TMD700A@groups.io
Subject: [TMD700A] Replacement fan suggestions

What's the current thinking on a replacement cooling fan for the D700?
Mine is getting rather noisy like they do, and I guess I am lucky it has
taken all this time to get to this point, despite a lot of use and a lot
of miles over the years.

Are the fans still available from Kenwood, or, is there a better fan
that you've found for this purpose?

Tnx es 73,

Doug, KA2WFT

521 - 540 of 13825