Re: D700A on APRS
hardlyevrhom
I also think you should try setting your path to Wide2-2. I do not
think that all digis will respond to the Wide1-1, and if that is the case then your beacon will only be digi'd one time with the 2-1 portion of your path. That might not be sufficient to reach an igate. The fact that when you are in some areas and are making it to an igate most likely means that there is NOT something wrong with the radio. One of the limitations of the D700 is it's memory capacity, which can be filled and jammed by a large packet from another type of TNC or system. If this happens the best way to reset is to turn off and on the BCON. You might also want to check your ability to get in the system with a track on http://aprsworld.net/ Kurt KC8RWD-14 --- In TMD700A@yahoogroups.com, "sailingto" <sailingto@...> wrote: have aforThank you for the input John, I was using WIDE1-1,WIDE2-1 today.problem with this D700A.What do you have it set to? Should be WIDE2-2 the past week I've been using WIDE1-1,WIDE2-2 and I do get to anleast 95% of the time, ONLY the KI4ELU-7 digi will digi me first. Onceit digi's me, I can make it ok.any of them.test. Then I got into N4TKT-2 which 351 miles away. I expect a localdigi helped me there, but just didn't show. Could that have been theand talk if you will email me a phone number, OR I will email you aphone number to talk this thing thru.
|
|