Re: Using sub-band for data

Thomas M. Schaefer <toms@...>

That is how it works!


----- Original Message -----
From: Karl G6ODT <g6odt@...>
To: <tmd700a@...>
Sent: Saturday, January 01, 2000 5:10 AM
Subject: [TMD700A] Using sub-band for data

From: "Karl G6ODT" <g6odt@...>

Can anybody confirm if this feature as described in the
TM-V7E manual applies to the TM-D700 ?

The TM-V7E manual says :-

Activating Data TX/RX Band
"If you prefer, you can send or receive data using a RX-Only
band where PTT is invisible. The Band with PTT is used for
voice communication."

I take this to mean that the Sub-band will operate on both TX/RX
for data and still give you normal operation for voice on the Main-Band.

Now as I beleive the TM-D700 is based on the TM-V7 can you do the
above ?

I'm still waiting to hear when the UK suppliers get their stock of the
I know of 2 who have them on order but as of yet no stock.

73 Karl G6ODT

24hr Digi 144.800 Relay,Wide,Irth,G6ODT

Community email addresses:
Post message: TMD700A@...
Subscribe: TMD700A-subscribe@...
Unsubscribe: TMD700A-unsubscribe@...
List owner: TMD700A-owner@...

Shortcut URL to this page:

Join to automatically receive all group messages.