Re: Cannot transmit with D700a using TNC PKT


Joseph LaFerla
 

Hi Don

 

Thanks for this.  Actually as per my other post, I solved the problem, my squelch was open and the DCD sense was stopping the transmit.  Sillly thing!

 

Joe VA3JLF

 

 

Sent from Mail for Windows 10

 

From: Don Poaps
Sent: September 25, 2020 4:17 PM
To: TMD700A@groups.io
Subject: Re: [TMD700A] Cannot transmit with D700a using TNC PKT

 

Are you using Linux or Windows?

 

Have you setup the menu to use 1200 B? Are you trying this on your voice side of the radio? That could be one reason why it won’t PTT.

 

 

73

 

 

Don

 

VA7DGP Data

VA7QU   Voice

 

Va7dgp@...

Subject: /wl2k

 

 

 

 

 

From: TMD700A@groups.io <TMD700A@groups.io> On Behalf Of Joseph LaFerla
Sent: Friday, September 25, 2020 10:51 AM
To: TMD700A@groups.io
Subject: [TMD700A] Cannot transmit with D700a using TNC PKT

 

I am trying to use my d700a with yaac or another aprs program to receive and transmit aprs packets.  Everything is set correctly and I can receive packets correctly.  However I cannot transmit.  The software is set up correctly but my beacon does not get transmitted, neither can I transmit if I hit the transmit button.  Is there some special setting that I have to set in my radio to enable transmission of packets?  This is only apparently a problem if I use the built-in tnc because if I connect an external tnc everything works fine. 

I would appreciate any help to get me going.  Thanks in advance.

Joe VA3JLF


--
Don 
VA7DGP/VA7QU

 

Join TMD700A@groups.io to automatically receive all group messages.