Re: TMD700 "Opening TNC"

David Flood

This is a known problem with the D700 when you previously had a computer
connected and used the radio in packet mode.

There is a set of commands that need to be sent to the radio by the computer
to successfully reset the TNC. I'll try to find them in the group archives
and resend them out. If you don't have immediate access to a computer then
you can do a VFO reset as an alternative but then you will need to reprogram
all of the internal APRS settings.


-----Original Message-----
From: TMD700A@... [mailto:TMD700A@...] On Behalf Of
Sent: Monday, July 21, 2008 09:10

Have a problem with a TMC700 Here, it just sits at "Opening tnc" when you
try and turn the TNC on.

Join to automatically receive all group messages.