Date   

Re: Dolly says no to statue, but yes to TLARC Net!

michael J. foley
 

But not on ZOOM!!!! Only on the TLARC 442.100 repeater.......


On Tue, Mar 2, 2021, 8:16 PM David Weikert <kf4dkw@...> wrote:


Dolly says no to statue, but yes to TLARC Net!

David Weikert
 


TLARC Net Invite -- Wed 3 Mar 21, 1900 EST

Chuck Ferguson - N4CSF
 

Calling all TLARC club members and guests.  Our next net is scheduled this Wednesday night, 3 Mar 21, at 1900 EST.  Please join us on the KN4DUA club repeater at 442.100 MHz, +5.0 MHz Offset, PL Tone 100.0 Hz.
The net convenes the first, second, fourth, and fifth Wednesdays of each month.  We reserve the third Wednesday for our monthly club meetings.
Those interested in becoming a weekly "Net Control" may contact Net Chair Randy Kruszka WK9M, and he will provide you the necessary information, script and guidance to get you started.
Also, please don't forget to complete the 2021 TLARC member survey, now available on the club website (www.tlarc.org). It will help us make the club more relevant to our members and the community.  As a first step, the survey will help us learn more about our rapidly growing membership and its collective interests, skills and ham capabilities.  Please take a moment to provide your input.
Thanks for all you do, and we look forward to hearing you on the air this Wednesday.
--

73,
Chuck Ferguson
N4CSF
TLARC Secretary


Cq u 2

mike wagner
 

Good Sunday morning to y’all!

Just a reminder if you have not completed the TLARC 2021 Survey...it is available on the web site, scroll down just a click, and on the right column you will spot the “caller”! Click on him or the written link and viola, fill out the form online and send online. No fuss no muss! It shall really help us out get hams working and helpin hams and TLARC in a direction all members would like to see for the 2021 year!
Get ready I feel a in person club meeting coming soon....guess we shouldda included a fav restaurant in the survey! Lol
Thanks and 73’s


Mike
KK6OKU 🦄
Tellico Lake Amateur Radio Club
Loudon County ARES


Icom 7300 & 7900 updates

Gary Stickel
 

FYI, to any owners:

Gary K4RQT
-------------

Many thanks to SWLing Post contributor, Ray Novak, who notes that Icom has issued the following firmware updates for the IC-7300 and IC-9700:

Icom IC-7300 Update

Changes from Version 1.30

[Spectrum scope is improved]
– A Scroll mode that can seamlessly change the displaying scope range, depending on the operating frequency, is added.
– A popup screen that displays when SPAN or EDGE change is added.
– The number of FIX EDGE memories is expanded to 4.
– Each band independently memorizes the Reference level.
– Improved the Scope function of the RS-BA1.

[Preset function is added for FT8 operation]
– A Preset function that can set each operation is added.

[Multi-function dial is enhanced]
– A Multi-function dial now works as a memory channel selector in the Memory mode.
– A Multi-function Menus Customization function is added.
– A function indicator for the Multi-function dial is added.

[Other changes]
– A Front Key Customization function that can change the function of [VOX/BK-IN], [AUTOTUNE], [?], and [?] is added.
– A MIC Key Customization function that can change the function of [UP] and [DOWN] is added.
– The Band Stacking Register window is added.
– While operating in the Data mode, the receive tone control is deactivated.
– The default setting of the CI-V USB Port is changed to “Unlink from [REMOTE].”

Refer to INFORMATION IC-7300 Version 1.40 for details.

The Scroll mode for the RS-BA1 Version 2 software will be added to Version 2.30.

Click here for full details and IC-7300 firmware update.



Hamfest Saturday 2/27/21

Bob McDonald
 

Hello
The Dalton Georgia annual Hamfest is this Saturday 2/27/21
8:00 AM Till 2:00 PM
Location is Legion Field Fairgrounds
A large Tailgating area is provided
Talk in is 145.23 PL 118.8  W4DRC

73s
KC4YVV 


Re: Drill press and v-block

Bruce Benton
 

When I was drilling dowels recently, I must cut a v-block on my table saw. I taped the dowel into it and added a stop block to my drill press.

Happy to show you the process, if you like.

I subsequently bought a right angle strip of aluminum channel at Home Depot to use in the future in my wooden v block

Bruce Benton

-------- Original Message --------
Subject: Re: [TLARC] Drill press and v-block
From: "WK9M" <randykgm@...>
Date: Thu, February 18, 2021 1:50 pm
To: TLARC@groups.io

I looked it up on Amazon earlier today and for around $20 you can get the drill jig for the press that you mount on the table.  Then everything that you put in the jig will automatically centered.  Pretty slick.

My hunch would be that for the cost of the machine shop work you could buy a small drill press and centering jig.  We were hoping someone had this setup in the club already but not sure.

On 2/18/2021 1:36 PM, michael J. foley wrote:
It's called drilling on center.

My suggestion is to look in the yellow pages for a local machine shop and have them do the work. Unfortunately, I don't know of anyone local.....



On Thu, Feb 18, 2021, 1:07 PM WK9M <randykgm@...> wrote:
Juan and I were emailing each other back and forth about the QST article
on November 2020, pg. 38.

In this article there is a suggestion to add hinge pins to your masts so
that you can lock them in place.  Juan and I both don't have a drill
press or tubing v-block that will let you center round objects and drill
a hole on the exact peak.

The goal is to drill all of the holes in the tubing such that they line
up and are still interchangeable with each other no matter which mast
you grab.  If one is 1/4" off to the right and another is 1/8" off to
the left then that's not too universal.  You get the idea; exact center
as much as possible.

If you have something or an idea reply to this and let us know; most
likely Juan may want to pay you a visit (and I am curious how you'd do
that).

'73
Randy
WK9M









Re: RamSat prepares for delivery

Gary Stickel
 

That is So cool!
Congratulations!!!
🎈🎉🎊🍾 


G --------------

On Feb 26, 2021, at 7:29 PM, David Andrews <n1esk1@...> wrote:

Hello everyone,

 

For some time now I’ve been involved with the STEM program at Robertsville Middle School in Oak Ridge and their efforts to construct a 2U CubeSat. The project is about to complete a major milestone. On March 8th, Dr. Peter Thornton and I will hand deliver the satellite, known as RamSat, to our launch integrator contractor in Houston. We will place the satellite into the PPOD (Poly-Picosatellite Orbital Deployer) which will then be integrated into a Cargo Dragon capsule atop a SpaceX Falcon 9 rocket for delivery to the International Space Station in May. See  https://en.wikipedia.org/wiki/SpaceX_CRS-22 for further details.

 

WVLT-TV produced a video segment recently on the program, and you can view it on the link below. I’ve also included a link to the RamSat project website. Start at the bottom of the page and work your way up to work forward in time. Lots of detailed descriptions and photos.

 

We have an operational ground station at the school, and a backup ground station for redundancy and after-hours access.

 

https://www.wvlt.tv/2021/02/22/east-tenn-middle-school-first-in-country-to-send-satellite-into-orbit-with-nasa/

 

https://sites.google.com/view/ramsat/home

 

Happy viewing,

 

David, N1ESK


Re: RamSat prepares for delivery

George N2APB
 

What terrific news this is, David -- How exciting! 

A multi-year endeavor by you, other advisors and students there at the middle school up in Oak Ridge ... and now you & Peter will be delivering the team's CubeSat to Houston on March 8th for blast-off in May ... WOW! 

The webmaster just put your excellent news piece at the very top of the TLARC website ... Godspeed to you and the team!

73, George N2APB
(I know the webmaster)
TLARC website ... 
https://www.tlarc.org/ 


Re: Drill press and v-block

Edward Goodhue
 

I have a harbor freight drill press that can be used but no TDC jig. 

Ted. w1eg


On Feb 18, 2021, at 1:50 PM, WK9M <randykgm@...> wrote:

 I looked it up on Amazon earlier today and for around $20 you can get the drill jig for the press that you mount on the table.  Then everything that you put in the jig will automatically centered.  Pretty slick.

My hunch would be that for the cost of the machine shop work you could buy a small drill press and centering jig.  We were hoping someone had this setup in the club already but not sure.

On 2/18/2021 1:36 PM, michael J. foley wrote:
It's called drilling on center.

My suggestion is to look in the yellow pages for a local machine shop and have them do the work. Unfortunately, I don't know of anyone local.....



On Thu, Feb 18, 2021, 1:07 PM WK9M <randykgm@...> wrote:
Juan and I were emailing each other back and forth about the QST article
on November 2020, pg. 38.

In this article there is a suggestion to add hinge pins to your masts so
that you can lock them in place.  Juan and I both don't have a drill
press or tubing v-block that will let you center round objects and drill
a hole on the exact peak.

The goal is to drill all of the holes in the tubing such that they line
up and are still interchangeable with each other no matter which mast
you grab.  If one is 1/4" off to the right and another is 1/8" off to
the left then that's not too universal.  You get the idea; exact center
as much as possible.

If you have something or an idea reply to this and let us know; most
likely Juan may want to pay you a visit (and I am curious how you'd do
that).

'73
Randy
WK9M









Re: Drill press and v-block

John Johnson
 

I may be able to do it for you.  Call me at 657 5182

John Johnson
KN4BXA

On Thu, Feb 18, 2021 at 1:50 PM WK9M <randykgm@...> wrote:
I looked it up on Amazon earlier today and for around $20 you can get the drill jig for the press that you mount on the table.  Then everything that you put in the jig will automatically centered.  Pretty slick.

My hunch would be that for the cost of the machine shop work you could buy a small drill press and centering jig.  We were hoping someone had this setup in the club already but not sure.

On 2/18/2021 1:36 PM, michael J. foley wrote:
It's called drilling on center.

My suggestion is to look in the yellow pages for a local machine shop and have them do the work. Unfortunately, I don't know of anyone local.....



On Thu, Feb 18, 2021, 1:07 PM WK9M <randykgm@...> wrote:
Juan and I were emailing each other back and forth about the QST article
on November 2020, pg. 38.

In this article there is a suggestion to add hinge pins to your masts so
that you can lock them in place.  Juan and I both don't have a drill
press or tubing v-block that will let you center round objects and drill
a hole on the exact peak.

The goal is to drill all of the holes in the tubing such that they line
up and are still interchangeable with each other no matter which mast
you grab.  If one is 1/4" off to the right and another is 1/8" off to
the left then that's not too universal.  You get the idea; exact center
as much as possible.

If you have something or an idea reply to this and let us know; most
likely Juan may want to pay you a visit (and I am curious how you'd do
that).

'73
Randy
WK9M









RamSat prepares for delivery

David Andrews
 

Hello everyone,

 

For some time now I’ve been involved with the STEM program at Robertsville Middle School in Oak Ridge and their efforts to construct a 2U CubeSat. The project is about to complete a major milestone. On March 8th, Dr. Peter Thornton and I will hand deliver the satellite, known as RamSat, to our launch integrator contractor in Houston. We will place the satellite into the PPOD (Poly-Picosatellite Orbital Deployer) which will then be integrated into a Cargo Dragon capsule atop a SpaceX Falcon 9 rocket for delivery to the International Space Station in May. See  https://en.wikipedia.org/wiki/SpaceX_CRS-22 for further details.

 

WVLT-TV produced a video segment recently on the program, and you can view it on the link below. I’ve also included a link to the RamSat project website. Start at the bottom of the page and work your way up to work forward in time. Lots of detailed descriptions and photos.

 

We have an operational ground station at the school, and a backup ground station for redundancy and after-hours access.

 

https://www.wvlt.tv/2021/02/22/east-tenn-middle-school-first-in-country-to-send-satellite-into-orbit-with-nasa/

 

https://sites.google.com/view/ramsat/home

 

Happy viewing,

 

David, N1ESK


FW: [EXTERNAL] Fwd: AUXCOMM of TN->FW: Severe Weather Awareness Week 2021

Sam Howard
 

AUXCOMM of TN->FW: Severe Weather Awareness Week 2021

FYI. Forwarded from Anderson County ARES

Sam KV4XY

 


Begin forwarded message:

 

From: "Elizabeth St. Vincent" <estvincent@...>

Subject: AUXCOMM of TN->FW: Severe Weather Awareness Week 2021

Date: February 24, 2021 at 12:15:42 PM EST

 

 

From: NWS Nashville - NOAA Service Account
Sent: Wednesday, February 24, 2021 10:04 AM
Subject: Severe Weather Awareness Week 2021

 

Good morning, All!

 

Unfortunately, there won't be SWAD this year, but in its place, starting Sunday, will be

 

 

All week, we'll be holding online classes covering all your favorite topics and some new ones, including:

  • A recap of the March 3rd, 2020 tornado (on the anniversary!)
  • Hazardous Weather Awareness for Large Businesses and Facilities
  • The role of social media with @NashSevereWx
  • A basic and advanced SKYWARN spotter class
  • And several Weather101 classes!

You can peruse the agenda and sign up for any or all of the classes here: weather.gov/ohx/swaw2021

 

Can't make a particular class? Look for the same classes to run through March and April:

 

 

Please, spread the word to all of your partners. You can find recent NWS Nashville posts on Facebook 

and Twitter to use in letting everyone know.  

 

Thanks and we'll "see you" online next week!

 

NWS Nashville

NWS Huntsville

NWS Morristown

NWS Memphis

 

P.S. You are receiving this email because you are subscribed to my personal AUXCOMM distribution list. If you no longer wish to receive these types of emails from me, simply reply to this message with the request to be removed. It’s that simple!

 

If you are receiving this email as a forwarded message, and would like to be added to this distribution list, or need to update your individual profile, please use the following registration link: https://docs.google.com/forms/d/e/1FAIpQLSdwrIbiNY4ei67hJr7B298BGgR7_R_SsNRpA4xD_i05gGjU5g/viewform

Copyleft and Disclaimer

This guide is written in the spirit of mutual aid and peer support.

Creative Commons License
This work is Creative Commons - Copyleft:

Attribution – you must attribute the work in the manner specified by the authors, but not in any way that suggests that they endorse you or your use of the work.

Noncommercial – You may not use this work for commercial purposes without the permission of the authors.

Share Alike – If you alter, transform, or build upon this work, you must distribute the resulting work under a share-alike license as well.

We encourage you to remix this material to suit your own local needs. Please send corrections and typos to estvincent@...

 


Huntsville hamfest in August is on!

David Andrews
 

Check out the link for details. Huntsville is happening this August.

 

N1ESK


Re: Rotator cable

Edward Goodhue
 

I am assuming 8 wire and I probably have something close in length. Need to get to the correct box and unpack. I also have a ham 4 and tail twister rotors that I plan to sell


On Feb 25, 2021, at 9:49 AM, Juan Lopez <jloz34@...> wrote:


Anyone have about 100 ft?

Juan
AC6ZM

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android


Rotator cable

Juan Lopez
 

Anyone have about 100 ft?

Juan
AC6ZM

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android


Re: Need Legacy Transceiver (Tube type) Trouble Shooting Help

Tim KE4OTZ Montgomery
 

I sent mine off to www.wb4hfn.com, he might answer questions you may have. Let me know if you want to get rid of it.

On Friday, February 19, 2021, 03:01:15 PM EST, Roger Calendine <rcalendine@...> wrote:


I haven't used my Drake TR4 transceiver in a long while.
 Tried setting it up for some SSB contacts, but not able to get any significant RF output, just about 10 w rather than ~250w.  
Xmitr gain, load and plate tuning process isn't really giving much output, so can use some experienced help.
Or a repair person in the area you know about that I can contact.
Please send me an email or call if you have any ideas (other then donation to the museum or dumpster.)
Thanks,
KB4VL
Roger Calendine
113 Golanvyi Trl, Vonore, TN 37885
rcalendine@...
P:423-884-2072


Next TLARC Net, Wednesday, 24 Feb, 1900 EST

Chuck Ferguson - N4CSF
 

Calling all TLARC club members and guests.  Our next net is scheduled this Wednesday night, 24 Feb 21, at 1900 EST.  Please join us on the KN4DUA club repeater at 442.100 MHz, +5.0 MHz Offset, with a PL Tone of 100.0 Hz.
The net convenes the first, second and fourth Wednesdays of each month.  We reserve the third Wednesday for our monthly club meetings.
Those of you interested in becoming a weekly "Net Control" may contact Net Chair Randy Kruszka WK9M, and he will provide you the necessary information, standard script and insightful guidance to get you started on your way.
Lastly, please don't forget to complete the TLARC 2021 member survey, now available on the club website (www.tlarc.org). Our desire is to make the club more relevant and valuable to our members and the community.  As a first step, the survey will help us learn more about our rapidly growing membership and its collective interests, skills and radio capabilities.  Please take a moment to provide your input when you have the chance.
Thanks for all you do, and we look forward to hearing you on the air this Wednesday.
--

73,
Chuck Ferguson
N4CSF
Secretary, Tellico Lake Amateur Radio Club


NASA to Reveal New Video, Images from Mars Perseverance Rover

George N2APB
 

Hey TLARC Space Cadets!

Ben Edwards AD4BE shared this really interesting news item about our new Mars rover ...

But wait, there’s more!  The TLARC webmaster tells me secrets (since I know him) that he and Ben are working up a new, WAY cool feature for the website that is guaranteed to capture the interest of all space cadets. 

It’ll come soon ... but until then enjoy these different posts from our Chief Space Cadet: AD4BE. 

73, George N2APB


Need Legacy Transceiver (Tube type) Trouble Shooting Help

Roger Calendine
 

I haven't used my Drake TR4 transceiver in a long while.
 Tried setting it up for some SSB contacts, but not able to get any significant RF output, just about 10 w rather than ~250w.  
Xmitr gain, load and plate tuning process isn't really giving much output, so can use some experienced help.
Or a repair person in the area you know about that I can contact.
Please send me an email or call if you have any ideas (other then donation to the museum or dumpster.)
Thanks,
KB4VL
Roger Calendine
113 Golanvyi Trl, Vonore, TN 37885
rcalendine@...
P:423-884-2072

901 - 920 of 2123