|
Re: Dolly says no to statue, but yes to TLARC Net!
But not on ZOOM!!!! Only on the TLARC 442.100 repeater.......
But not on ZOOM!!!! Only on the TLARC 442.100 repeater.......
|
By
michael J. foley
·
#1237
·
|
|
Dolly says no to statue, but yes to TLARC Net!
By
David Weikert
·
#1236
·
|
|
TLARC Net Invite -- Wed 3 Mar 21, 1900 EST
--
73,
Chuck Ferguson
N4CSF
TLARC Secretary
--
73,
Chuck Ferguson
N4CSF
TLARC Secretary
|
By
Chuck Ferguson - N4CSF
·
#1235
·
|
|
Cq u 2
Good Sunday morning to yβall!
Just a reminder if you have not completed the TLARC 2021 Survey...it is available on the web site, scroll down just a click, and on the right column you will spot the
Good Sunday morning to yβall!
Just a reminder if you have not completed the TLARC 2021 Survey...it is available on the web site, scroll down just a click, and on the right column you will spot the
|
By
mike wagner
·
#1234
·
|
|
Icom 7300 & 7900 updates
FYI, to any owners:
Gary K4RQT
-------------
Many thanks to SWLing Post contributor, Ray Novak, who notes that Icom has issued the following firmware updates for the IC-7300 and IC-9700:Icom IC-7300
FYI, to any owners:
Gary K4RQT
-------------
Many thanks to SWLing Post contributor, Ray Novak, who notes that Icom has issued the following firmware updates for the IC-7300 and IC-9700:Icom IC-7300
|
By
Gary Stickel
·
#1233
·
|
|
Hamfest Saturday 2/27/21
Hello
The Dalton Georgia annual Hamfest is this Saturday 2/27/21
8:00 AM Till 2:00 PM
Location is Legion Field Fairgrounds
A large Tailgating area is provided
Talk in is 145.23 PL 118.8
Hello
The Dalton Georgia annual Hamfest is this Saturday 2/27/21
8:00 AM Till 2:00 PM
Location is Legion Field Fairgrounds
A large Tailgating area is provided
Talk in is 145.23 PL 118.8
|
By
kc4yvv@...
·
#1232
·
|
|
Re: Drill press and v-block
When I was drilling dowels recently, I must cut a v-block on my table saw. I taped the dowel into it and added a stop block to my drill press.
Happy to show you the process, if you like.
I
When I was drilling dowels recently, I must cut a v-block on my table saw. I taped the dowel into it and added a stop block to my drill press.
Happy to show you the process, if you like.
I
|
By
Bruce Benton
·
#1231
·
|
|
Re: RamSat prepares for delivery
That is So cool!
Congratulations!!!
ππππΎ
G --------------
That is So cool!
Congratulations!!!
ππππΎ
G --------------
|
By
Gary Stickel
·
#1230
·
|
|
Re: RamSat prepares for delivery
What terrific news this is, David -- How exciting!
A multi-year endeavor by you, other advisors and students there at the middle school up in Oak Ridge ... and now you & Peter will be delivering the
What terrific news this is, David -- How exciting!
A multi-year endeavor by you, other advisors and students there at the middle school up in Oak Ridge ... and now you & Peter will be delivering the
|
By
George N2APB
·
#1229
·
|
|
Re: Drill press and v-block
I have a harbor freight drill press that can be used but no TDC jig.
Ted. w1eg
I have a harbor freight drill press that can be used but no TDC jig.
Ted. w1eg
|
By
Edward Goodhue
·
#1228
·
|
|
Re: Drill press and v-block
I may be able to do it for you. Call me at 657 5182
John Johnson
KN4BXA
I may be able to do it for you. Call me at 657 5182
John Johnson
KN4BXA
|
By
John Johnson
·
#1227
·
|
|
RamSat prepares for delivery
Hello everyone,
For some time now Iβve been involved with the STEM program at Robertsville Middle School in Oak Ridge and their efforts to construct a 2U CubeSat. The project is about to
Hello everyone,
For some time now Iβve been involved with the STEM program at Robertsville Middle School in Oak Ridge and their efforts to construct a 2U CubeSat. The project is about to
|
By
David Andrews
·
#1226
·
|
|
FW: [EXTERNAL] Fwd: AUXCOMM of TN->FW: Severe Weather Awareness Week 2021
AUXCOMM of TN->FW: Severe Weather Awareness Week 2021
FYI. Forwarded from Anderson County ARES
Sam KV4XY
Begin forwarded message:
From: "Elizabeth St. Vincent" <estvincent@...>
Subject: AUXCOMM
AUXCOMM of TN->FW: Severe Weather Awareness Week 2021
FYI. Forwarded from Anderson County ARES
Sam KV4XY
Begin forwarded message:
From: "Elizabeth St. Vincent" <estvincent@...>
Subject: AUXCOMM
|
By
Sam Howard
·
#1225
·
|
|
Huntsville hamfest in August is on!
Check out the link for details. Huntsville is happening this August.
N1ESK
https://www.youtube.com/watch?v=XKQ3s6w0VDM&t=42s
Check out the link for details. Huntsville is happening this August.
N1ESK
https://www.youtube.com/watch?v=XKQ3s6w0VDM&t=42s
|
By
David Andrews
·
#1224
·
|
|
Re: Rotator cable
I am assuming 8 wire and I probably have something close in length. Need to get to the correct box and unpack. I also have a ham 4 and tail twister rotors that I plan to sell
I am assuming 8 wire and I probably have something close in length. Need to get to the correct box and unpack. I also have a ham 4 and tail twister rotors that I plan to sell
|
By
Edward Goodhue
·
#1223
·
|
|
Rotator cable
Anyone have about 100 ft?
Juan
AC6ZM
Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android
Anyone have about 100 ft?
Juan
AC6ZM
Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android
|
By
Juan Lopez
·
#1222
·
|
|
Re: Need Legacy Transceiver (Tube type) Trouble Shooting Help
I sent mine off to www.wb4hfn.com, he might answer questions you may have. Let me know if you want to get rid of it.
I sent mine off to www.wb4hfn.com, he might answer questions you may have. Let me know if you want to get rid of it.
|
By
Tim KE4OTZ Montgomery
·
#1221
·
|
|
Next TLARC Net, Wednesday, 24 Feb, 1900 EST
--
73,
Chuck Ferguson
N4CSF
Secretary, Tellico Lake Amateur Radio Club
--
73,
Chuck Ferguson
N4CSF
Secretary, Tellico Lake Amateur Radio Club
|
By
Chuck Ferguson - N4CSF
·
#1220
·
|
|
NASA to Reveal New Video, Images from Mars Perseverance Rover
Hey TLARC Space Cadets!
Ben Edwards AD4BE shared this really interesting news item about our new Mars rover
Hey TLARC Space Cadets!
Ben Edwards AD4BE shared this really interesting news item about our new Mars rover
|
By
George N2APB
·
#1219
·
|
|
Need Legacy Transceiver (Tube type) Trouble Shooting Help
I haven't used my Drake TR4 transceiver in a long while.
Tried setting it up for some SSB contacts, but not able to get any significant RF output, just about 10 w rather than ~250w.
Xmitr gain,
I haven't used my Drake TR4 transceiver in a long while.
Tried setting it up for some SSB contacts, but not able to get any significant RF output, just about 10 w rather than ~250w.
Xmitr gain,
|
By
Roger Calendine
·
#1218
·
|