Hi all, The motor on my 1942 10L seems to have given up the ghost, and despite my best Google Fu, I’ve had a very difficult time coming up with the best replacement motors due to the fact that it is f

I am in the process of rebuilding a heavy 10 headstock, so I bought this spindle on EBay and it was listed as a Southbend heavy 10L spindle. Looking at pics online the heavy 10 I'm not seeing the fine

Has anyone added an X axis motor to a South Bend Heavy 10 c/w taper attachment? If so any photos? Thanks John "ELS! Nothing else works as well for your Lathe" Automation Artisans Inc. www dot autoarti

Hi,

Hi, This is part 2 of an introductory note with a question. I am rebuilding a heavy 10 and find that in a previous move the plunger fell out of the bull gear and took a walk for itself. The whole spin

My twin wide range gear box on heavy 10 works fine except in E and F screw feeds. Lead screw will turn for a short time then stall. Some stall quicker then others in these two ranges. Any ideas?

Hi, Does anyone know where I can get instructional videos and also tips in general? Any videos? Thanks

I have added several more editions of HTRAL. Some are quite large. They may take a while to download Jim B. -- Jim B

Hi all, Question for the wise, I have the old guard mount motor switch that came with my lathe, unfortunately it was totally gutted when I got it so is little more than a pretty looking shell. I had t

I am having a heck of a time trying to get the nut off of the cross slide handle. Does anyone have a trick? I made a spanner tool, and promptly broke it. I tried a small torch and some penetrating oil

Hi all, I hope you are doing well, I bought a Cushman 3506 chuck on the cheap and after cleaning the outside and taking out the screws I still can't figure out how it comes a part. The jaws are out of

I have a really nice 9A, but there are times I would like a bigger hole through the headstock, so I'm on the lookout for either a Heavy 10 or 13. If you have one or know of one available near Long Isl

Does somebody in the group own a South Bend 10K metric lathe? I would like a picture of the cross feed dial in order to see the scribings and number stamping pattern Thanks Guy Cadrin ________________

I am in the process of tearing down, cleaning and seeing what needs replaceg on my SB 16/24. Is there a way to measure the nuts on the cross slide and compound to see how bad the wear is? I have the o

G'Day, my SB13B is now back up and running - making chips, and enjoying the world again. Since I don't have a spanner for the tailstock clamping nut, I was toying with making a camlock system to go in

Hi. What are people using for belts on 10K undermount? Payson.

Like most of you I am confined home because of covid19 I am in the process of upgrading with larger dials my 9A toolroom lathe with a 2 in dial on the cross feed axis. It is currently fitted with 1 3/

Hello Steve, here is a clear photo of the foot. Their is 4 holes for leveling the tail stock. There is no other ways to level these lathes. The 1945 16/24 lathe is also listed on MPLS Craigslist. =

I thought I'd reach out for a bit of help from the group. The motor start switch in my 1959 9" needs replacing and I can't seem to find one. Hopefully a member will have a source. The motor is a 56 fr

My first post was just sent I have never posted on any groups before that post was sent as a poll it may not have been the correct procedure if so excuse me. Good day to you all, this is my first post